Kuppersberg VBMC 115 - Инструкция по эксплуатации - Страница 26

26

TECHNICAL PASSPORT

ENGLISH

Built-under Freezer - Fridge

3.U S I N G  T H E  A P P L I A N C E

“Door Open” Indicator;

The «Door Open» indicator on the 

handle shows whether the door has closed 

properly or whether it remains open.

If the indicator is red, the door is still 

open.If the indicator is white, the door is 

properly closed.

 The freezer door should always 

be kept closed. This will prevent food 

products from defrosting. Any heavy ice 

and frost build-up inside the freezer, and an 

unnecessary increase in energy consumption, 

will be avoided.

3.1 Thermostat Setting

The freezer thermostat automatically 

regulates the temperature of the 

compartment. Freezer temperatures can 

be obtained by rotating the knob to higher 

numbers, 1 to 5.

 Important note: Do not try to rotate 

the knob beyond position 1, it will stop your 

appliance from working.

Thermostat Settings

1 – 2 : For short-term storage of food in 

the freezer compartment.

3 – 4 : For long-term storage of food in 

the freezer compartment.

5: For freezing fresh food. The appliance 

will work longer. Once the food is fully 

frozen, reset the thermostat to its original 

position.

3.2 Temperature Settings Warnings

Â

The ambient temperature, 

temperature of the freshly stored food and 

how often the door is opened affects the 

temperature in the freezer compartment. If 

required, change the temperature setting.

Â

It is not recommended that you 

operate your freezer in environments colder 

than 10°C in terms of its efficiency.

Â

When setting the thermostat, take 

into consideration how often the appliance 

door is opened and closed, how much food 

is stored in the freezer, and the environment 

in which the freezer is located.

Â

When the appliance is first switched 

on, allow it to run for 24 hours in order to 

reach operating temperature. During this 

time, do not open the door and do not keep 

a large quantity of food inside.

Â

Unplug your appliance during 

a power cut to prevent damage to the 

compressor. Once power is restored, delay 

plugging in your appliance for 5 to 10 

minutes. This will help prevent damage to 

the appliance’s components.

Â

Your appliance is designed to 

operate in the ambient temperature ranges 

stated in the standards, according to the 

climate class stated in the information label. 

It is not recommended that your freezer is 

operated in the environments which are 

outside of the stated temperature ranges. 

This will reduce the cooling efficiency of the 

appliance.

Â

Your appliance is designed to operate 

in the ambient temperature (SN = 10°C 

- 32°C) intervals stated in the standards,