Kuppersberg NRS 186 BE - Инструкция по эксплуатации - Страница 34

34

TECHNICAL PASSPORT

ENGLISH

Larder

Bubbling noise and splash: This noise is 

caused by the flow of the refrigerant in the 

tubes of the system.

Water  flow  noise: 

Normal  flow  noise  of 

water  flowing  to  the  evaporation  container 

during defrosting. This noise can be heard 

during defrosting.

Air Blow Noise: ormal fan noise. This 

noise can be heard in fridges during 

normal operation of the system due to the 

circulation of air.

If the edges of fridge cabinet that the 

door joint contact are warm;

Especially in summer (hot weather), 

the surfaces that the joint contact may 

get warmer during the operation of the 

compressor, this is normal.

If humidity builds up inside the fridge;

Â

Are all food packed properly? Are the 

containers dried before placing them in the 

fridge?

Â

Is the fridge’s door opened 

frequently? Humidity of the room gets in the 

fridge when the door is opened. Humidity 

build up will be faster when you open the 

door more frequently, especially if the 

humidity of the room is high.

If the door is not opened and closed 

properly;

Â

Do the food packages prevent 

closing of the door?

Â

Are the door compartments, shelves 

and drawers placed properly?

Â

Are door joints broken or torn?

Â

Is your fridge on a level surface?

IMPORTANT NOTES:

Â

Compressor protection function will 

be activated after sudden power breakdowns 

or after unplugging the appliance, because 

the gas in the cooling system is not 

stabilized yet. Your appliance will start after 

5 minutes, there is nothing to worry about.

Â

If you will not use your fridge for a 

long time (e.g. in summer holidays) unplug 

it. Clean your fridge according to chapter 

“CLEANING AND MAINTENANCE” and leave 

the door open to prevent humidity and smell.

Â

To stop the appliance completely, 

unplug from main socket (for cleaning and 

when the door is left open)

Â

If the problem persists after you have 

followed all the instructions above, please 

consult to the nearest Authorized service.

Â

The lifetime of your appliance stated 

and declared by the Department of the 

Industry is 10 years (the period for retaining 

parts required for the proper functioning of 

the appliance).

Tips for saving energy

1.Install the appliance in a cool, well

ventilated room , but not in direct sunlight 

and not near heat source (radiator, cooker. . 

etc). Otherwise use an insulating plate. 

2.Allow ward food and drinks to cool

down outside the appliance. 

3.When placing, drinks and slops they 

must be covered. Otherwise humidity 

increases at the appliance. Therefore the 

working time gets longer. Also covering 

drinks and slops helps to save smell and 

taste.

4.When placing food and drinks, open 

the appliance door as briefly as possible. 

5.Keep close the covers of any different

temperature compartment in the appliance 

(crisper, chiller . . .etc ). 

6.Door gasket must be clean and pliable. 

Replace gaskets if worn.