Kuppersberg NOFF19565 C - Инструкция по эксплуатации - Страница 8

8

TEchnical passporT

English

refrigerator  noFF 19565

Â

Please do not place hot foods or 

drinks inside the refrigerator.

Â

The refrigerator shall not be 

over-loaded, or internal air circulation 
will be blocked.

Â

Please do not install the 

refrigerator at a place exposed to direct 
sunshine or close to heating devices 
(such as roaster, dish-washing machine, 
or heating installation).

Â

Please store foods in closed 

containers.

Â

For products for which the 

freezing chamber is equipped: After the 
shelf or drawer of the freezing chamber 
is removed, it will be available to place 
the maximum quantity of foods inside 
the freezing chamber of the refrigerator. 
The stated energy consumption value of 
the refrigerator is determined after the 
shelf or drawer of the freezing chamber 
is removed and the maximum quantity 
of foods is loaded. It is safe to use the 
shelf or drawer according to the shape 
and size of the foods to be frozen.

Â

Defrosting the frozen foods 

inside the freezing chamber has 
the energy-saving effect and could 
effectively maintain the quality of foods.

  I N S TA L L AT I O N

You shall please notice that, if 

you do not follow the information 
of this Manual, the manufactory will 
not assume any responsibility for the 
damages which will happen.

 Before  operation 
of the refrigerator

Before using the refrigerator, you 

shall please check the following 
contents:

1. Check whether the inside of the 

refrigerator is dry, and whether the air 

could fl ow freely behind the refrigerator.

2. Install 2 plastic wedges, as shown 

in  the  fi gure.  The  plastic  wedges  will 

provide a necessary distance between 
the refrigerator and the wall, in order to 
allow the circulation of air.

(The  fi gure  is  only  provided  as 

an example, and it is possibly not 
completely the same as your product.)

3. Clean the inside of the refrigerator 

according to the suggestions in the 
Chapter “Maintenance and Cleaning”.

4. Open the refrigerator plug and 

insert it into a wall-type socket. When 
the door of the freezing chamber is 
opened, relevant lamps inside it will 
turn on.

5. When the compressor is started, 

you will hear a sound. Even if the 
compressor does not work, the sealed