Kuppersberg KRB 19369 - Инструкция по эксплуатации - Страница 27

27

STOP FROST SYSTEM 

(depending on the model)

The STOP FROST SYSTEM (available depending on the model) facilitates the defrost procedure 

for the freezer compartment. The STOP FROST accessory (figure 1) is designed to collect some 

of the frost that forms in the freezer compartment and it is easy to remove and clean, therefore 

reducing the time needed to defrost the inside of the freezer compartment. 

To remove the frost on the STOP FROST accessory follow the cleaning procedure demonstrated 

below. 

PROCEDURE TO CLEAN THE STOP FROST 

ACCESSORY 

-  Open the freezer compartment door and 

remove the upper drawer (figure 2).

-  Unfasten the STOP FROST accessory 

(figure 3) and remove it (figure 4), taking 

care not to drop it on the glass shelf below. 

Note: if the accessory is jammed or difficult 

to remove, do not keep trying to remove it, 

but proceed with the complete defrost of the 

freezer compartment. 

- Close the door to the freezer compartment.

-  Remove the frost on the accessory by rinsing 

it under running (not hot) water (figure 5).

-  Let the accessory drip dry and dry the plastic 

parts with a soft cloth.

-  Reinsert the accessory by placing the back 

part on the projections shown in figure 7-A, 

then refasten the handle of the accessory to 

the clasps above (figure 7-B).

-  Reinsert the upper drawer and close the door 

to the freezer compartment. 

It is possible to clean the STOP FROST 

accessory on its own without completely 

defrosting the freezer compartment. Cleaning 

the STOP FROST accessory regularly helps 

to reduce the need to completely defrost the 

freezer compartment. 

Note:

 the product specifications, including 

volume and energy, are calculated without the 

STOP FROST accessory.

Click!!

Click!!

A 

B

1

2

5

7

6

3

4