Kuppersberg CRB 17762 - Инструкция по эксплуатации - Страница 29

29

Before contacting the Technical 

Assistance Service:

Restart the appliance to check if the problem 

has been solved. If not, disconnect the 

appliance again and repeat the procedure after 

one hour.

If, after having completed the checks listed in 

the guide for malfunctions and after restarting 

the appliance, your appliance continues to 

function incorrectly, contact the Technical 

Assistance Service, clearly describing the 

problem and stating:

•  the type of malfunction

• the model

•  the type and serial number of the appliance 

(written on the rating plate)

•  the Service number (if available) (the number 

that is after the word SERVICE on the rating 

plate placed inside the appliance) 

Note:

Reversing the doors of the appliance, if 

carried out by the Technical Assistance 

Service, is not considered as a warranty 

claim.

TECHNICAL ASSISTANCE SERVICE

Removing the "Zero Degrees" compartment:

Carry out the following steps:

-  to make it easier to remove the compartment, we recommend that you empty (and possibly 

remove) the lower door shelves

- turn off the compartment

- remove the compartment by rotating it upwards 

- remove the white plastic shelf under the compartment

Note:

 it is not possible to remove the upper shelf and side supports.

To use the “

Zero Degrees

” compartment again, carefully reposition the white plastic shelf under 

the compartment before inserting the drawer and turning the function back on. 

To have a larger refrigerator volume and to reduce energy consumption, it is recommended that 

you turn off the “

Zero Degrees

” compartment and remove the compartment.

Clean the compartment and its components occasionally using a cloth and a solution of warm 

water (taking care not to submerge the white plastic shelf under the drawer) and neutral cleaning 

agents specifically for cleaning the inside of the refrigerator. Do not use abrasive cleaning agents.

Before cleaning the compartment (also externally) it is necessary to remove the drawer to 

disconnect the electrical supply for the compartment.