KitchenAid KCBCR 18600 - Инструкция по эксплуатации - Страница 6

6

power cable.

• Do not pull the aplliance power

cable

• The appliance must be handled

and installed by two or more
persons.

•Installation and maintenance

including replacement of the
supply cord must be carried out

by the manufacturer or a qualified
technician, in compliance with the
manufacturer’s instructions and
the local safety regulations in
force. In order to avoid a hazard
do not repair or replace any part
of the appliance including the
supply cord, unless specifically
stated in the user manual.

1. Packing

The packing material is 100% recyclable and bears
the recycling symbol 

. For disposal, comply with

the local regulations. Keep the packing materials
(plastic bags, polystyrene parts, etc.) out of the
reach of children, as they are a potential source of
danger.

2. Scrapping/Disposal

The appliance is manufactured using recyclable
material.
This appliance is marked in compliance with
European Directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE). By ensuring
the correct disposal of this appliance, you can help
prevent potentially negative consequences for the
environment and the health of persons.

The symbol 

on the appliance, or on the

accompanying documents, indicates that this
appliance should not be treated as domestic waste
but must be taken to a special collection centre for
the recycling of electrical and electronic equipment.
When scrapping the appliance, make it unusable by
cutting off the power cable and removing the doors

and shelves so that children cannot easily climb
inside and become trapped.
Scrap the appliance in compliance with local
regulations on waste disposal, taking it to a special
collection centre; do not leave the appliance
unattended even for a few days, since it is a
potential source of danger for children.
For further information on the treatment, recovery
and recycling of this product, contact your
competent local office, the household waste
collection service or the shop where you purchased
the appliance.

Declaration of conformity

• This appliance has been designed for preserving

food and is manufactured in compliance with
Regulation (CE) No. 1935/2004.

• This appliance has been designed, manufactured

and marketed in compliance with:

- safety objectives of the “Low Voltage” Directive

2006/95/CE (which replaces 73/23/CEE and
subsequent amendments);

- the protection

Safeguarding the environment

To ensure best use of your appliance, carefully
read the operating instructions which contain
a description of the product and useful advice.
Keep these instructions for future reference.

1.

After unpacking the appliance, make sure it is
not damaged and that the door closes properly.

Any damage must be reported to the dealer
within 24 hours of delivery of the appliance.

2.

Wait at least two hours before switching the
appliance on, to ensure that the refrigerant
circuit is fully efficient.

3.

Clean the inside of the appliance before using it.

Before using the appliance