Viking VBI7360WRWH - Инструкция по эксплуатации - Страница 17

17

P

roduc

t C
a

re

 Service  Information

 If service is required, call your authorized service agency. 

Have the following information readily available:
• Model number
• Serial number
• Date purchased
• Name of dealer from whom purchased

Clearly describe the problem that you are having. If you are unable to obtain the name of an authorized service agency, or if you 
continue to have service problems, contact Viking Range at (888) 845-4641 or write to:

VIKING RANGE, LLC

PREFERRED SERVICE

111 Front Street

Greenwood, Mississippi 38930 USA

Record the information indicated below. You will need it if service is ever required. The serial number and model numbers for your 
refrigerator are located on the upper wall, behind the lighting:

Model No. _______________________________________________ Serial No.  ______________________________________
 
Date of Purchase__________________________________________ Date Installed ___________________________________

Dealer’s Name ___________________________________________________________________________________________

Address ________________________________________________________________________________________________

_______________________________________________________________________________________________________

If service requires installation of parts, use only authorized parts to insure protection under the warranty.

Keep this manual for future reference.

Alarm Digital Display Codes

Alarm Code

Code Explanation

High Temperature 
Alarm

Alarm will sound and display will fl ash when temperature exceeds the high temperature 
allowed.  Press alarm button.  Sound will mute but display will continue to fl ash until normal 
maximum temperature is reached.

Water Filter Alarm

When it is time to change the water fi lter, the water fi lter button will illuminate to blue.  After 
fi lter has been changed, the illuminated button will go off .

Open Door Alarm

If any door or drawer is opened longer than 3 minutes, the open door alarm will sound.  
Closing the door will turn the open door alarm off .

Long term power 
loss Alarm

After a long term power loss, the temperature will display a power loss.  Press any key to clear 
the power loss indicator

Bluezone® Bulb 
Replacement 
Indicator

When the Bluezone® bulb needs replacement, the thin blue Bluezone® indicator strip will 
appear along the bottom of the refrigerator display.  After replacing the bulb, press and hold 
the Refrigerator Selector button for 3 seconds to clear display.

Clean Condenser 
Coil Indicator

The refrigerator temperature display will blink “CL” when it is time to clean the condenser coils.

Troubleshooting