De Dietrich DRS 635 JE - Инструкция по эксплуатации - Страница 10

35

Electrical connection

Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply. Voltage
can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized
auto-transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a
contact for this purpose.

If the domestic power supply socket is not earthed,
connect the appliance to a separate earth in
compliance with current regulations, consulting a
specialist technician.

The Manufacturer declines all responsibility if
the above safety precautions are not observed.

Door Reversibility

The appliance is supplied with the door

opening to the right.

For door opening in the opposite direction,
perform the following actions prior to
installation

1. Unscrew the upper pin and remove the spacer

2. Remove the door.

3. Unscrew the lower pin and remove the spacer;

replace them on the opposite side.

4. Reinsert the door and screw the pin and the

spacer back in place on the opposite side.

This appliance complies with the following

E.E.C. Directives:

- 87/308 EEC

of 2/6/87 relative to radio interference

suppression.

- 73/23 EEC

of 19.2.73 (Low Voltage Directive) and

subsequent modifications;

- 89/336 EEC

of 3.5.89 (Electromagnetic

Compatibility Directive) and subsequent
modifications.