Sharp SJ-XE35PMBE - Инструкция по эксплуатации - Страница 16

16

• Temperature indicator changes as the pictures below  

(

3→4→5→1→2→3

) in each case (Refrigerator compartment 

/ Freezer compartment) by pressing “R” or “F” button.

1

2

3

4

5

NOTE

• At first, both compartments are set at “Factory setting”.

• After adjusting the temperature level, the indicator will turn  

off approximately 5 seconds later.

• When the operation of refrigerator stops because of power 

failure, temperature setting is restarted from the previous 

setting at the time of re-power.

Advanced Setting of Refrigerator /  

Freezer compartment

The temperature of refrigerator compartment and freezer compartment 

can be adjusted in 9 levels (level 

1 ~

9

) by following steps. 

Refrigerator compartment

1. 

Press “R” button first. Hold down “R” button and then press 
“Express freezing” button for 3 seconds or more.

The indicator will return to “Factory setting”.

2. 

Press “R” button to change the temperature level. 

Follow step 

1

 again if you want to adjust the temperature in 5 levels.

Freezer compartment

1. 

Press “F” button first. Hold down “F” button and then press 
“Express freezing” button for 3 seconds or more.

The indicator will return to “Factory setting”.

2. 

Press “F” button to change the temperature level. 

Follow step 

1

 again if you want to adjust the temperature in 5 levels.

Controlling Temperature

The refrigerator controls its temperature automatically. However, you can adjust the temperature in 5 levels.

How to check the current temperature 

level

The indicator will be “ON ” to show the current temperature 

level by pressing “R” or “F” button.
Refrigerator compartment   : Press “R” button.

Freezer compartment  

: Press “F” button.

Setting of Refrigerator / Freezer 

compartment

Refrigerator compartment

1. 

Press “R” button.  
 

2. 

Press “R” button to change the temperature level.

Freezer compartment

1. 

Press “F” button.  
 

2. 

Press “F” button to change the temperature level.

Beep beep beep

Beep

Beep

Level

Indicator

<Factory setting>

Beep beep beep

• Temperature indicator changes as the pictures 

below (

5→6→7→8→9→1→2→3→4→5

) in 

each case (Refrigerator compartment / Freezer 

compartment) by pressing “R” or “F” button.

1

2

3

4

5

6

7

8

9

... 

... 

... 

<Factory setting>

OFF               Lighting                 Flashing

Level

Indicator

(B803).indb   16

2017/02/17   14:53:32