Sharp SJ-EX98FSL - Инструкция по эксплуатации - Страница 21

21

ENGLISH

Power consumption

Power consumption of this model is measured according 

to the international standard of refrigerator performance.

If the refrigerator is operated with the 

accessories (shaded area) taken out, it 

works under the most energy efficient 

condition.

• The amount of power consumption 

of this model is measured with these 

accessories taken out as indicated 

shaded area.

• The amount of power 

consumption of this model 

is measured under the 

space dimensions on the 

right picture.

■

Keep the ventilation space as much as 

possible around the refrigerator.

■

Keep your refrigerator out of direct sunlight, 

and do not place it next to heat generating 

appliance.

■

Avoid opening the door as much as possible.

■

Hot foods should be cooled before storing.

■

Place the food evenly on the shelves to allow 

the cool air to circulate efficiently.

Tips for saving energy

300mm

90mm

300mm

60mm

Important

To prevent cracks on inside surfaces and plastic 

components, follow these tips 

• Wipe out food oil adhered to plastic parts.

• Some household chemicals may cause damage, so use 

only diluted washing-up liquid (soapy water).

• If  undiluted  detergent  is  used  or  soapy  water  is  not 

wiped  off  thoroughly,  it  may  result  in  cracks  of  plastic 

parts.

Cleaning

■

Remove the accessories (e.g. shelves) from the cabinet 

and the door. Wash them by warm soapy dishwashing 

water. After that, rinse them in clean water and dry.  

(Only fruit and vegetable shelf is not removable.)

■

Clean the inside with a cloth soaked in warm soapy 

dishwashing water. Then, use cold water to wipe off 

soapy water thoroughly.

■

Wipe the exterior with a soft cloth each time it gets 

dirty.

■

Clean the Magnetic door seal with a toothbrush and 

warm soapy dishwashing water.

■

Wipe the control panel with a dry cloth.

Note

• Do not use heavy-duty cleansers or solvents (lacquer, 

paint, polishing powder, benzine, boiled water, etc.) 

which may cause damages.

• If you pull out the power plug once, wait 5 minutes at 

least before connecting the power plug again.

• The glass shelves weigh approximately 3 kg each. Hold 

them firmly when remove from the cabinet and carry.

• Do not drop objects inside the refrigerator or strike the 

inner wall. This may cause cracks to inner surface.

Before transporting

Wipe up water in the evaporating pan. Before wiping 

up the water, wait more than 1 hour after pulling out the 

power plug because refrigeration cycle equipment is 

extremely hot.  

(The evaporating pan is located on the rear of the 

product.)

Switching off your refrigerator

If the refrigerator needs to be switched off for an 

extended period, the following steps should be taken to 

reduce the growth of mold:

1. Remove all food.

2. Remove the power plug from the socket.

3. Clean and dry the interior thoroughly.

4. Keep all the doors open slightly for a few days to dry.

Defrosting

Defrosting is automatically operated by a unique energy 

saving system.

When the compartment light is blown

Contact the service agent approved by SHARP to 

replace the light. The light is not to be replaced other 

than by qualified service personnel.

Care and cleaning

Evaporating pan

B695.indb   21

2015/12/16   17:15:38