Sharp SJ-CT361RWH - Инструкция по эксплуатации - Страница 7

7

EN
G

L

IS

H

WARNING

■

Unplug the refrigerator first to prevent electric 

shock.

■

Do not splash water directly on the outer cabinet 

or the interior. This may lead to rusting and 

deterioration of the electrical insulation.

IMPORTANT

To prevent cracking on inside surfaces and plastic 

components, follow these tips. 

• 

Wipe any food oils adhered to plastic components.

• 

Some household chemicals may cause damage, so use 

only diluted washing-up liquid (soapy water).

• 

If undiluted detergent is used or soapy water is not wiped 

off thoroughly, cracking of plastic parts can result. 

1 

Remove the shelves and pockets from the cabinet and 

door. Wash them in warm soapy dishwashing water; 

rinse in clean water and dry. (Only fruit and vegetable 

shelf is not removable.)

2 

Clean the inside with a cloth soaked in warm soapy 

dishwashing water. Then, use cold water to wipe off 

soapy water.

3 

Wipe the exterior with a soft cloth each time it is soiled. 

4 

Clean the Magnetic door seal with a toothbrush and 

warm soapy dishwashing water. 

NOTE 

• 

To prevent damage to your refrigerator, do not use heavy 

duty cleansers or solvents (lacquer, paint, polishing powder, 

benzine, boiled water, etc.). 

• 

If the power supply is disconnected, please wait for at least 

5 minutes before re-connecting power.

• 

The glass shelves weigh approximately 2 kg each. Hold 

firmly when removing from the cabinet or carrying. 

• 

Do not drop objects inside the refrigerator or strike the inner 

wall. This may cause the inner surface to crack. 

Defrosting 

Defrosting is fully automatic due to a unique energy saving 

system. 

When the compartment light is blown

Contact the service agent approved by SHARP to request 

a replacement compartment light. The compartment light 

is not to be removed other than by qualified service 

personnel. 

Switching off your refrigerator 

If you switch your refrigerator off when you are going away 

for an extended period, remove all food, clean the interior 

thoroughly. Remove the power cord plug from the power 

socket and leave all doors open. 

Before you call for service, check the following points.

IF YOU STILL REQUIRE SERVICE 

Refer to your nearest service agent approved by SHARP. 

CARE AND CLEANING

Problem

Solution

The outside of a cabinet is hot when 

touched.

It is normal. The hot pipe is in the cabinet in order to prevent dew generation.

When there is refrigerator noise.

It is normal for the refrigerator to produce the following sounds.

• 

Loud noise produced by the compressor when operation starts 

--- Sound becomes quieter after a while.

• 

Loud noise produced once a day by the compressor 

--- Operating sound produced immediately after automatic defrost 

operation.

• 

Sound of flowing fluid (gurgling sound, fizzing sound) 

--- Sound of refrigerant flowing in pipes (sound may become louder from 

time to time).

• 

Cracking or crunching sound, squeaking sound 

--- Sound produced by expansion and contraction of inner walls and internal 

parts during cooling.

Frosting or dew generation occurs 

inside or outside the refrigerator.

This may occur in one of the following cases. Use a wet cloth for wiping frost 

and a dry cloth for wiping dew.

• 

When the ambient humidity is high.

• 

When the door is frequently opened and closed.

• 

When foods containing plenty of moisture are stored. (Wrapping is required.)

The foods in the refrigerator 

compartment freeze.

• 

Is the refrigerator operated for a long time with temp. control set at MAX?

• 

Low ambient temperature may cause placed foods to freeze even if 

refrigerator temp. control  is set to MIN.

It smells in the compartment.

• 

Wrapping is required for the foods with strong smell.

• 

Deodorizing unit cannot remove all of smell.

WHAT TO DO BEFORE YOU CALL FOR SERVICE

(A850)Eng.fm  Page 7  Monday, October 29, 2007  9:55 AM