LG GC-B247SMDC - Инструкция по эксплуатации - Страница 12

12

EN

Removing the Door

When it is necessary to move the appliance 

through a narrow opening, removing the doors is 

the recommended procedure.

WARNING

•

Disconnect the power cord, house fuse or 

circuit breaker before installing or servicing the 

appliance. Failure to follow these instructions 

may result in death, fire or electric shock.

If your entrance door is too narrow for the 

appliance to pass through, remove the appliance 

doors and pass the appliance laterally.

[For both freezer and fridge]

1 

Remove the screw of the hinge cover on top of 

the appliance by rotating it counterclockwise. 

2 

While pressing (1) hook of the link of the 

electrical connectors, remove the link by 

pulling it in both directions. 

3 

Remove the hinge lever by tapping the end of 

it toward the outside edge of the cabinet. 

CAUTION

•

When removing the upper hinge, be sure to 

support the door as it will fall forwards. It is 

recommended that two or more people carry out 

the door removal and refitting.

4 

Lift the upper hinge fixed between the 

appliance and the appliance door and then 

remove it. 

Upper hinge

Door

5 

Remove the freezer and fridge compartment 

door by lifting it upward. At this time, the door 

should be lifted enough for the steel pipe to be 

completely pulled out. 

Refitting the Door

Mount the doors in the reverse sequence of their 

removal once the appliance has been passed 

through all access doors.