WORX 40В, 2х2.5 Ач, двойное ЗУ 2x2A WG779E - Инструкция по эксплуатации - Страница 19

Газонокосилки WORX 40В, 2х2.5 Ач, двойное ЗУ 2x2A WG779E - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 36
Загружаем инструкцию
background image

19

Cordless Lawn Mower 

EN

guards are all undamaged and are correctly attached 

to mower. Carry out any necessary maintenance or 

repairs before operating mower.  If the mower should 

happen to fail despite regular maintenance, please call 

our customer helpline for advice. 

BLADE SHARPENING

KEEP BLADE SHARP FOR BEST MOWER 

PERFORMANCE. 

WEAR PROPER EYE PROTECTION WHILE REMOVING, 

SHARPENING, AND INSTALLING BLADE. ENSURE 

THAT SAFETY KEY IS REMOVED.

Sharpening the blade twice during a mowing season 

is usually sufficient under normal circumstances. 

Sand causes the blade to dull quickly. If your lawn 

has sandy soil, more frequent sharpening may be 

required.

REPLACE BENT OR DAMAGED BLADE IMMEDIATELY.

WHEN SHARPENING THE BLADE:

1.  Make sure blade remains balanced.

2.  Sharpen blade at the original cutting angle.

3.  Sharpen cutting edges on both ends of blade, 

removing equal amounts of material from both ends.

NOTE: 

1. Be sure the mower is turned off and remove 

the key. 

2.   Place the mower in stand up storage mode.

TO SHARPEN BLADE IN A VISE (See Fig. M)

1.   Be sure the switch lever is released, the blade 

has stopped and the safety key removed before 

removing the blade.

2.   Remove blade from mower. See instructions for 

removing and attaching blade.

3.   Secure blade M-1 in a vise M-2.

4.   Wear safety glasses and be careful not to cut 

yourself.

5.   Carefully file the cutting edges of the blade with a 

fine tooth file M-3 or sharpening stone.

6.   Check balance of blade. See instructions for blade 

balancing.

7.   Replace blade on mower and tighten securely. 

Refer to instructions below.

BLADE BALANCING (See Fig. N)

Check balance of blade by placing center hole in blade 

N-1 over a nail or screwdriver shank N-2, clamped 

horizontally in a vise N-3. If either end of the blade 

rotates downward, file that end. Blade is properly 

balanced when neither end drops.

BLADE MAINTENANCE (See Fig. O1, O2)

Renew your metal blade after 50 hours mowing or 2 

years, whichever is the sooner-regardless of condition.

Follow these procedures to remove and replace the 

blade. You will need garden gloves (not provided) and 

a spanner wrench (not provided) to remove the blade. 

Hold the blade (19) and unscrew the blade bolt (18) 

counter-clockwise using a spanner wrench, and then 

remove blade.

To re-assemble, position the blade (19) with the 

cutting edges towards the ground. Then securely 

tighten the blade bolt (18). 

STORAGE (See Fig. L1, L2)

Stop the mower and always remove the safety key. 

Clean the exterior of the machine thoroughly using 

a soft brush and cloth. Do not use water, solvents or 

polishes. Remove all grass and debris, especially from 

the ventilation slots.

Turn the machine on its side and clean the blade area. 

If grass cuttings are compacted in the blade area, 

remove with a wooden or plastic implement.

Store the machine in a dry place. Do not place other 

objects on top of the machine.

To aid storage, release the handle knob, and fold the 

upper handle as shown in Fig. L1 & L2.

ENVIRONMENTAL 

PROTECTION

Waste electrical products must not be disposed 

of with household waste. Please recycle where 

facilities exist. Check with your local authorities 

or retailer for recycling advice.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к WORX 40В, 2х2.5 Ач, двойное ЗУ 2x2A WG779E?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"