STIGA COMBI 344e Kit 294426068/ST2 - Инструкция по эксплуатации - Страница 87

EN - 3

• 

When transporting accumulators, make sure the 

contacts never come into contact with each other 

and never use metal containers to transport them.

 2.6  ENVIRONMENTAL PROTECTION

• 

Scrupulously comply with local regulations for the 

disposal of packaging, deteriorated parts or any 

elements with a strong environmental impact; this 

waste must not be disposed of as normal waste, 

it must be separated and taken to specified waste 

disposal centres where the material will be recycled.

• 

Scrupulously comply with local regulations 

for the disposal of waste materials.

• 

When the machine is withdrawn from service, 

do not dispose of it in the environment, but take 

it to a waste disposal facility in accordance 

with the local regulations in force.

Do not throw electrical equipment away with 

domestic waste.

 According to the European 

Directive 2012/19/UE on electrical and electronic 

equipment waste and its implementation 

in compliance with national standards, old 

electrical equipment must be collected separately, for 

eco-compatible recycling. If electrical equipment is 

disposed of in dumps or in landfills, hazardous substances 

can leak into the groundwater and contaminate the food 

chain, damaging your health and well-being. For further 

information on the disposal of this product, contact 

your dealer or a domestic waste collection service.

At the end of their working life, dispose 

of batteries paying due attention to 

the environment.

 Batteries contain 

material classified as hazardous for 

you and the environment. They must 

be removed and disposed of separately at a 

facility that accepts lithium-ion batteries.

Separate waste collection of the products 

and packaging used allows the materials to 

be recycled and reused.

 Reuse of recycled 

materials help to prevent environmental pollution 

and reduces the demand for raw materials.

3.  GETTING TO KNOW THE MACHINE

 3.1  DESCRIPTION OF THE MACHINE 

AND PLANNED USE

This machine is a pedestrian controlled lawnmower.

The machine is essentially composed of a motor 

which drives a blade enclosed in a casing, 

equipped with wheels and a handle.

The operator is able to operate the ma

chine and 

use the main controls, always staying behind the 

handle at a safe distance from the rotating blade.

If the operator leaves the machine, the motor 

and blade will stop within a few seconds.

 3.1.1  Intended use

This machine was designed and manufactured 

for cutting grass in gardens and grassy areas, 

carried out by a pedestrian operator.

Generally speaking this machine can:

1. 

Mow the grass and collect it in the grass catcher.

2. 

Mow the grass and discharge it on the 

ground from the rear section.

3. 

Mow, cut and deposit the grass on the 

ground (mulching effect - if provided ).

The use of special attachments provided for by the 

Manufacturer as original equipment or which may be 

purchased separately, allows this work to be done in 

various operating modes, illustrated in this manual or the 

instructions that accompany the single attachments.

 3.1.2  Improper use

Any other usage not in keeping with the afore-

mentioned ones may be hazardous and 

harm persons and/or damage things.

Examples of improper use may 

include, but are not limited to:

– Allowing children, animals or other 

passengers to ride on the machine as 

they could fall off and injure themselves or 

compromise safe driving by the operator.

– Letting oneself be transported by the machine.

– Using the machine to tow or push loads.

–

Using the blade on surfaces other than grass.

– Using of the machine for leaf or debris collection.

– Using the machine to trim hedges, or for 

cutting vegetation other than grass.

– Use of the machine by more than one person.

IMPORTANT

 Improper use of the machine will 

invalidate the warranty, relieve the Manufacturer from 

all liabilities, and the user will consequently be liable 

for all and any damage or injury to himself or others.

 3.1.3 

User types

This machine is intended for use by consumers, 

i.e. non-professional operators.

It is intended for “DIY” use only..

IMPORTANT

 The machine must 

be used by one operator.

 3.2  MAIN COMPONENTS 

(

Fig

. 1)

A.

Chassis:

 this is the casing that 

houses the rotating blade.

B.

Motor:

 the driving force for the blade.

C.

Cutting means (blade):

 the element 

designed to cut the grass.

D.

Rear discharge guard:

 it is a safety device 

which prevents objects drawn up by the blade 

from being hurled away from the machine.

E.

Grass catcher:

 as well as collecting the 

grass cuttings, this is also a safety element 

that stops any objects drawn up by the blade 

from being hurled away from the machine.

F.

Handle:

 this is the operator’s work station. It is 

long enough to ensure the operator remains at a 

safe distance from the rotary blade whilst working.

G.

Control lever:

 starts/stops the motor and 

simultaneously engages/disengages the blade.

H.

Hatch for accessing the battery compartment

I.

Safety key (Deactivation device):

 The key 

enables / disables the machine’s electric circuit.