Ryobi ONE+ RLM18X33H40 5133002526 - Инструкция по эксплуатации - Страница 5

chute cover, or the grass box and grass 

discharge chute cover

●

hands and feet of all persons are not 

clear of the cutting enclosure

■

Never operate the product if the on/off 

switch on the handlebar does not properly 

start and stop the mower.

■

Never attempt to lock the on/off switches in 

the on position, this is extremely dangerous.

■

Do  not  force  the  product.  It  will  do  the  job 

better and safer at the speed for which it 

was designed.

■

Stop the blade when crossing gravel 

surfaces.

■

Do not pull the product backward unless 

absolutely necessary. If you must back the 

product away from a wall or obstruction, 

first look down and behind to avoid tripping 

or pulling the product over your feet.

■

Stop the motor and allow the blade to stop if 

the mower has to be tilted for transportation 

when crossing surfaces other than grass, 

and when transporting the product to and 

from the area to be mowed.

■

Never use the product with defective guards 

or shields, or without safety devices, for 

example, deflectors and/ or grass boxes, 

in place.

■

Do not tilt the lawn mower when switching 

on the motor or while the motor is running. 

This exposes the blade and increases the 

probability of objects being thrown.

■

Switch on the motor carefully according 

to instructions  and keep hands and feet 

away from cutting area. Keep clear of the 

discharge opening at all times. Do not start 

the product when standing in front of the 

discharge opening.

■

Do not put hands or feet near or under 

rotating parts. Keep clear of the discharge 

opening at all time.

■

Never pick up or carry the product while it 

is running. 

■

Stop the mower motor and remove isolator 

key, make sure that all moving parts have 

come to a complete stop for the below 

cases:

●

whenever you leave the product 

unattended (including disposal of grass 

clippings)

●

before cleaning a blockage or unclogging 

discharge chute

●

before checking, cleaning or working on 

the product 

●

after  striking  a  foreign  object  (inspect 

the product for damage and make 

repairs as necessary before restarting 

and operating the product)

●

before removing the grass box or 

opening the grass discharge chute cover

●

If the product starts to vibrate abnormally 

(check immediately)

–

inspect for damage, particularly the 

blades

–

replace or repair any damaged parts

–

check for and tighten any loose parts

■

Avoid holes, ruts, bumps, rocks, property 

stakes,  or  other  hidden  objects.  Uneven 

terrain could cause a slip and fall accident.

■

Always ensure the motor control cable 

is never trapped, pinched or otherwise 

damaged during assembly or when folding 

the handle.

OVERLOAD AND OVERHEAT 

PROTECTION

The product has an overload protection 

device. When overloading is detected, the 

product will automatically switch off. If the 

overload protector is actuated, the on-off 

button must be released. Press the on-off 

button to restart the product.
The battery pack has overheat protection. 

Excessive temperatures will cause the battery 

to stop powering the product. Feel the battery 

pack; if it is too warm, allow it to cool down 

before resuming operation. If the product still 

does not work, recharge the battery.

NOTE:

 The battery pack LED indicator will 

not work if the battery protection feature has 

caused the battery pack to stop powering the 

product. Release the on-off button or remove 

the battery pack from the product and the 

battery pack LED indicator will resume normal 

function.

RESIDUAL RISKS

Even when the product is used as prescribed, 

it is still impossible to completely eliminate 

certain residual risk factors. The following 

hazards may arise in use and the operator 

should pay special attention to avoid the 

following: 

3

English |

EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK