Ryobi 36В RLM36x46H50PG 5133005484 - Инструкция по эксплуатации - Страница 6

6

Original Instructions

POWER ASSIST  LEVER

The product is equipped with a power assist 

lever that activates the self-propel function. 

Pressing the power assist lever down drives 

the product forward without having the user 

push it.

NOTE:

 The power assist feature functions 

normally when the product is used on a 

fl

 at 

surface. The user needs to push the product 

forward when using the product on slopes or 

uneven surfaces because the power assist 

function will be limited and may cause the 

wheel to slip.

GENERAL MOWING TIPS

The run time of the battery depends on the 

condition, length, and density of the grass.
Adjust the cutting height of the lawnmower to 

suit the current condition of the lawn.

■

For best performance, always cut off one-

third or less of the total height of the grass.

■

When cutting long grass, reduce walking 

speed to allow for more effective cutting and 

a proper discharge of the clippings.

■

A higher cutting height extends the run time 

of the battery pack.

TRANSPORTATION AND  STORAGE

■

Turn off the product, and remove the isolator 

key and the battery pack. Make sure that 

all moving parts have come to a complete 

stop. Allow the product to cool down before 

storing or transporting.

■

Remove all foreign materials from the 

product. Store the product in a cool, dry, and 

well-ventilated place that is inaccessible 

to children. Keep the product away from 

corrosive agents such as garden chemicals 

and de-icing salts. Do not store the product 

outdoors.

■

For transportation in vehicles, remove the 

isolator key, and secure the product against 

movement or falling to prevent injury to 

persons or damage to the product.

■

Use extreme caution when lifting or tilting 

the product for maintenance, cleaning, 

storage, or transportation. The blade is 

sharp. Keep all body parts away from the 

blade while it is exposed.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local 

and national provisions and regulations.
Follow all special requirements on packaging 

and labelling when transporting batteries by a 

third party. Ensure that no batteries can come 

in contact with other batteries or conductive 

materials while in transport by protecting 

exposed connectors with insulating, non-

conductive caps or tape. Do not transport 

batteries that are cracked or leaking. Check 

with the forwarding company for further advice.

MAINTENANCE

■

Use only original manufacturer’s 

replacement parts, accessories, and 

attachments. Failure to do so can cause 

possible injury, can contribute to poor 

performance, and may void your warranty.

■

Servicing requires extreme care and 

knowledge and should be performed only by a 

qualified service technician. Have the product 

serviced by an authorised service centre only.

■

Turn off the product, and remove the isolator 

key and the battery pack. Make sure that all 

moving parts have come to a complete stop 

before any cleaning or maintenance task.

■

Replace worn or damaged parts for safety.

■

Frequently check the grass catcher for wear 

or deterioration.

■

Check all nuts, bolts, and screws at frequent 

intervals for proper tightness to ensure that 

the product is in safe working condition.

■

Be careful during adjustment of the product 

to prevent entrapment of the fingers between 

moving blades and fixed parts of the product.

■

When servicing the blades, be aware that 

even though the power source is turned off, 

the blades can still be moved.

■

You may make adjustments and repairs 

described in this manual. For other repairs, 

have the product serviced by an authorised 

service centre only.

■

After each use, clean the plastic parts with 

a soft, dry cloth. Any part that is damaged 

should be properly repaired or replaced by 

an authorised service centre.

■

The blade on the product is sharp. Use 

extreme caution, and wear heavy-duty 

gloves when fitting, replacing, cleaning, or 

checking bolt security.