Husqvarna LC 353V 9676052-01 - Инструкция по эксплуатации - Страница 70

MACHINE´S SAFETY EQUIPMENT

70 – English

General

This section describes the machine´s safety equipment, 
its purpose, and how checks and maintenance should be 
carried out to ensure that it operates correctly.

Cutting cover

•

The cutting cover is designed to reduce vibration and 
to reduce the risk of cuts.

Checking the cutting cover

•

Make sure the cutting cover is not damaged and that 
there are no visible defects such as cracks.

Engine brake handle

•

The engine brake is designed to stop the engine. 
When the grip on the engine brake handle is released 
the engine should stop.

Checking the engine brake handle

•

Apply full throttle and then release the brake handle. 
The engine should stop and the drive should 
disengage. The engine brake should always be 
adjusted so that the engine stops within 3 seconds.

Muffler

•

The muffler is designed to keep noise levels to a 
minimum and to direct exhaust fumes away from the 
user.

Inspecting the muffler

•

Check regularly that the muffler is complete and 
secured correctly.

!

WARNING! Never use a machine that has 
faulty safety equipment! If your machine 
fails any checks contact your service 
agent to get it repaired.

Prevent unintentional starting by 
removing the ignition cable from the 
spark plug.

!

WARNING! Never use a machine without 
a muffler, or with a faulty muffler. A 
damaged muffler may substantially 
increase the noise level and the fire 
hazard. Keep fire fighting equipment 
handy.

The muffler gets very hot during and 
after use. This also applies during idling. 
Be aware of the fire hazard, especially 
when working near flammable 
substances and/or vapours.