Газонокосилки Husqvarna LC 247Li 9676629-01 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
LED on the battery
Possible faults
Possible procedure
The error LED flashes
The battery is weak
Charge the battery. See
The temperature in the work environ-
ment is too high or too low
Use the battery in temperatures between -10°C
and 40°C.
Overvoltage
Check that the mains voltage is the same as on
the rating plate on the product.
Remove the battery from the battery charger. Wait
5 seconds and try again to charge the battery. If
the problem continues, speak to an authorised
service agent.
The error LED is on
Cell difference too much (1V)
Speak to an approved service agent.
Battery charger
LED on the battery
charger
Possible faults
Possible procedure
The error LED flash-
es
The temperature in the work en-
vironment is too high or too low
Use the battery charger in temperatures between 5°C
and 40°C.
The error LED is on
Speak to an approved service agent
Control panel
For problems, other than those in this section, speak to
your service agent.
Keypad
Error code (Num-
ber of flashes)
Possible faults
Possible action
Error LED flashes
3
The motor is overloaded
Increase the cutting height. See
the cutting height on page 12.
5
The motor speed drops too
much, and the motor stops
10
The motor control is too hot
Stop the motor and wait until it has be-
come cool
2
The blade is blocked
To prevent accidental start turn the safe-
ty key to 0, remove the battery and wait
a minimum 5 seconds. Make sure that
the blade can rotate freely. If the prob-
lem continues, speak to an authorised
service agent
9
Battery error or no signal from
battery
Put the battery in the product correctly
and examine the battery connector. If the
error LED on the battery flashes, see
Battery on page 12.
The product stops
8
The battery is weak
Charge the battery. See
0
Battery connector failure
Examine the battery connector
16
429 - 002 - 13.12.2017
