Газонокосилки Bosch Rotak 32 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
14
| English
F 016 L81 165 | (19.11.14)
Bosch Power Tools
Notified body:
TÜV Rheinland Intercert Kft., Budapest, Hungary, Nr. 1008
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
19.11.2014
Mounting and Operation
Troubleshooting
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action
Figure
Page
Delivery Scope
1
185
Handle Assembly
2
185
Snap together the Grassbox
3
185
Grassbox fitting/removing
3
185
Adjusting the Cutting Height
4
186
Connecting the Extension Lead
5
186
Starting
5
186
Stopping
5
186
Working Advice
5 – 6
186 – 187
Blade Maintenance
7
187
Selecting Accessories
7
187
STOP
Problem
Possible Cause
Corrective Action
Motor refuses to start
Power turned off
Turn power on
Mains socket faulty
Use another socket
Extension cable damaged
Inspect cable, replace if damaged
Fuse faulty / blown
Replace fuse
Possible clogging
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Motor protector has activated
Allow motor to cool and increase height of cut
Mowing too low for the conditions
Increase height of cut
Machine functions
intermittently
Extension cable damaged
Inspect cable, replace if damaged
Internal wiring of machine damaged
Contact Service Agent
Motor protector has activated
Allow motor to cool and increase height of cut
Machine leaves ragged finish
and/or
Motor labours
Height of cut too low
Increase height of cut
Cutting blade blunt
Replace the blade
Possible clogging
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Blade fitted upside down
Refit blade correctly
Blade not rotating while garden
product switched on
Cutting blade obstructed
Switch off garden product
Clear obstruction (always wear protective
gloves)
Blade nut/bolt loose
Tighten blade nut/bolt (17 Nm)
Excessive vibrations/noise
Blade nut/bolt loose
Tighten blade nut/bolt (17 Nm)
Cutting blade damaged
Replace the blade
OBJ_BUCH-1266-005.book Page 14 Wednesday, November 19, 2014 3:12 PM
