Bosch Rotak 32 0.600.885.B00 - Инструкция по эксплуатации - Страница 19

 English | 

19

Bosch Power Tools

F 016 L70 585 | (10.11.09)

Noise/Vibration Information

Measured sound values determined according 
to 2000 / 14 / EC (1.60 m height, 1 m distance 
away).
Typically the A-weighted noise levels of the 
product are: Sound pressure level 79 dB(A); 
sound power level 93 dB (A). Uncertainty 
K = 1 dB.
Vibration total values (triax vector sum) deter-
mined according to EN 60335:
Vibration emission value a

h

< 2.5 m/s

2

,

Uncertainty K = 1.5 m/s

2

.

Declaration of Conformity

We declare under our sole responsibility that 
the product described under “Technical data” is 
in conformity with the following standards or 
standardization documents: EN 60335 accord-
ing to the provisions of the directives 
2004/108/EC, 98/37/EC (until 28 Dec 2009), 
2006/42/EC (from 29 Dec 2009), 2000/14/EC.
2000/14/EC: Guaranteed sound power level 
94 dB (A). Conformity assessment procedure 
according to Annex VI.
Equipment category: 32
Notified body:
SRL, Sudbury, England, Nr. 1088
Technical file at:
Bosch Lawn and Garden Ltd., PT-LG/EAE,
Stowmarket, Suffolk IP14 1EY, England

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

09.11.2009

Assembly

For Your Safety

f

Warning! Switch off, remove plug from 
mains before adjusting, cleaning or if cable 
is cut, damaged or entangled.

f

The blades continue to rotate for a few sec-
onds after the machine is switched off.

f

Caution  –  do not touch the rotating blade.

Electrical Safety

Your machine is double insulated for safety and 
requires no earth connection. The operating 
voltage is 230 V AC, 50 Hz (for non-EU countries 
220 V, 240 V as applicable). Only use approved 
extension cables. Contact your Bosch Service 
Centre for details.
Extension cords/leads should only be used if 
they comply with H05VV-F, H05RN-F types or 
IEC type design (60227 IEC 53, 60245 IEC 57).

If you want to use an extension cable when op-
erating your product, only the following cable di-
mensions should be used:
– 1.0 mm

2

: max. length 40 m

– 1.5 mm

2

: max. length 60 m

– 2.5 mm

2

: max. length 100 m

Note: If an extension cable is used it must be 
earthed and connected through the plug to the 
earth cable of your supply network in accord-
ance with prescribed safety regulations.
If in doubt contact a qualified electrician or the 
nearest Bosch Service Centre.

f

WARNING! Inadequate extension cables 
can be dangerous. Extension cable, plug 
and socket must be of watertight construc-
tion and intended for outdoor use.

Cable connections should be kept dry and off 
the ground.
It is recommended for increased electrical safe-
ty to use a Residual Current Device (RCD) with 
a tripping current of not more than 30 mA. Al-
ways check your RCD every time you use it.

Dr. Egbert Schneider
Senior Vice President
Engineering

Dr. Eckerhard Strötgen
Head of Product
Certification