Bosch EasyRotak 36-550 06008B9B00 - Инструкция по эксплуатации - Страница 18

18

 | English

Noise/Vibration Information

 3 600 HB9 B..

Noise emission values determined according to 

EN 60335-2-77

.

Typically the A-weighted noise levels of the product are:

– Sound pressure level

dB(A)

84

– Sound power level

dB(A)

96

– Uncertainty K

dB

= 1.5

Vibration total values ah (triax vector sum) and uncertainty K determined according to 

EN 60335-2-77

– Vibration emission value a

h

m/s

2

< 2.5

– Uncertainty K

m/s

2

= 1.5

Mounting and Operation

Action

Figure

Page

Delivery scope

A)

A

314

Mounting wheels

B

315

Mounting the handle

Adjusting the working height

C

316

Snap together the Grassbox

D

317

Grassbox fitting/removing

E

317

Setting the height of cut

F

318

Inserting the battery

G

318

Operation
- Inserting the isolator switch 
- Switching on
- Mowing
- Switching off
- Removing the isolator switch

H

319

Removing the battery

I

320

Working advice “mowing”

J

320

Blade maintenance/Blade replacement

K

321

Selecting accessories

L

321

A)

Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Starting Operation

For Your Safety

u

Warning! Switch off, remove the isolator switch and
the battery before adjusting or cleaning. The same ap-
plies when the cable to the switch in the handle is
damaged, cut or entangled.

u

The blade continues to rotate for a few seconds after
the machine is switched off.

u

Caution: Do not touch the rotating blade.

Charging the Battery

The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 35 °C. In this manner, a high battery service life is
achieved.

Note: 

The battery is supplied partially charged. To ensure

full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not cause damage to the battery.
The “Electronic Cell Protection (ECP)” protects the lithium-
ion battery against deep discharging. When the battery is
empty, the product is switched off by means of a protective
circuit: The product no longer operates.

Do not continue to press the On/Off switch after an auto-
matic shut-off of the product.

 The battery could become

damaged.
Observe the notes for disposal of the battery.

Inserting/Removing the Battery

Note:

 Using unsuitable batteries can lead to malfunctions or

damage the machine.
Insert the charged battery. Ensure the battery is inserted
correctly.
To remove the battery from the machine, press the battery
unlocking button and pull the battery out.

Charging Procedure

The charging procedure starts as soon as the mains plug of
the charger is plugged into a socket outlet and the battery is
inserted onto the charger .
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery
is charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.

F 016 L81 912 | (06.02.2020)

Bosch Power Tools