Bosch ART 30 Combitrim - Инструкция по эксплуатации - Страница 12

12

 | English 

F 016 L81 549 | (8.3.16)

Bosch Power Tools

Your machine is double insulated for 
safety and requires no earth connec-
tion. The operating voltage is 230 V AC, 
50 Hz (for non-EU countries 220 V). 
Only use approved extension cables. 
Contact your Bosch Service Centre for 
details.

It is recommended for increased 
electrical safety to use a Residual 
Current Device (RCD) with a tripping 
current of not more than 30 mA. Al-
ways check your RCD every time you 
use it.

For products 

not sold in GB

:

WARNING:

 For your safety, it is re-

quired that the plug attached to the ma-
chine is connected with the extension 
cord. The coupling of the extension 
cord must be protected against splash 
water, be made of rubber or coated 
with rubber. The extension cord must 
be used with a cable strain relief.
The connection lead must be inspected 
for signs of damage at regular intervals 
and may only be used if in perfect con-
dition.
If the supply cord is damaged, it must 
be replaced by a Bosch Service Centre.
Extension cords should only be used if 
they comply with H05VV-F or H05RN-F 
types.
If you want to use an extension cable 
when operating, only the following ca-
ble dimensions should be used:
- 1.5 mm

2

 – max length 20 m

- 2.5 mm

2

 – max length 50 m



Products sold in GB only:

 Your prod-

uct is fitted with a BS 1363/A ap-
proved electric plug with internal fuse 
(ASTA approved to BS 1362).

If the plug is not suitable for your 
socket outlets, it should be cut off 
and an appropriate plug fitted in its 
place by an authorised customer ser-
vice agent. The replacement plug 
should have the same fuse rating as 
the original plug.
The severed plug must be disposed of 
to avoid a possible shock hazard and 
should never be inserted into a mains 
socket elsewhere.

Products sold in AUS and NZ only:

Use a residual current device (RCD) 
with a rated residual current of 30 mA 
or less.

Symbols

The following symbols are important for reading and under-
standing the operating instructions. Please take note of the 
symbols and their meaning. The correct interpretation of the 
symbols will help you to use the garden product in a better 
and safer manner.

Symbol

Meaning

Wear protective gloves

Movement direction

Reaction direction

Weight

Switching On

Switching Off

Permitted action

Prohibited action

Audible noise

Accessories/Spare Parts

CLICK!

OBJ_BUCH-2342-003.book  Page 12  Tuesday, March 8, 2016  1:21 PM