AL-KO Highline 46.8 SPI 119844 - Инструкция по эксплуатации - Страница 25

GB

25

Mulching with the mulch kit (optional)

When mulching, the grass cuttings are not collected, but 
are left on the lawn. The grass mulch prevents the soil 
from drying out, and supplies it with nutrients.

The best results are obtained by cutting back regularly 
by about 2 cm. Only young grass with a soft leaf texture 
decomposes quickly.

„

Grass height before mulching:  8 cm maximum

„

Grass height after mulching:  4 cm minimum

Adapt your walking pace to the mulching process, 
do not walk too fast.

Inserting the mulch kit

Caution - Risk of injury!

Insert/remove the mulch kit only with the motor 
switched off and when the mower blade has come 
to a standstill.

1.  Remove the grass catcher (  

6

).

2.  Lift the de

fl

 ector plate and insert the mulch kit in the 

outlet shaft (  

7

).

It must lock into place.

If the mulch kit is not locked into position, both the 
mulch kit and the mower blade may be damaged.

Removing the mulch kit

1.  Lift the de

fl

 ector plate. 

2.  Release the lock on the mulch kit (  

8/1

).

3.  Pull out the mulch kit (  

8/2

).

Mowing with the side outlet duct (optional)

Caution - risk of injury!

Attach/detach the side outlet only when the motor 
is switched off and the mower blade has come to 
a standstill.

Inserting the side outlet

1.  Remove the grass catcher and insert the mulch kit.

2.  Fold up the side outlet cover and hold it (  

9/1

).

3.  Insert the side outlet duct (  

9/2

).

4.  Slowly close the cover.

The cover holds the side outlet duct and prevents 
it falling out.

Removing the side outlet

1.  Fold up the side outlet cover and hold it (  

9/1

).

2.  Remove the side outlet and close the cover 

(  

9/2

).

Setting the handle height (optional)

Clamp adjustment

1.  Hold the bar and loosen both clamps (  

10

).

2.  Move the bar to the desired position

3.  Lock the clamps.