Газонокосилки AL-KO FC 13-90.5 HD 2WD - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
Translation of the original operating instructions
- 15 -
Installation prior to first commissioning (for authorized solo by AL-KO dealer)
Installation of driver's seat and steering wheel
Delivery, packaging, assembly
ATTENTION!
Squeezing hazard during
installation!
Parts of the body may be squeezed when
components are mounted.
Risk of high dead weight
•
The machine must not be lifted manually.
•
Pull machine from pallet.
•
Remove machine parts separately from packaging.
Transport inspection
•
Check the machine for completeness and potential damage upon delivery.
•
The machine shall be supplied to the specialist dealer in a partially assembled
condition.
•
Assembly and start-up have to be performed by a specialist dealer and/or an expert
in this field.
Packaging
•
Please dispose of packaging materials separately.
Fix steering wheel
• Set the front wheels to the to the straight-ahead position.
• Place the clamping sleeve (a) on the steering column.
• Place the steering wheel (4b) on the clamping sleeve.
Note
: Make sure the position is correct with the spoke pointing towards the
operator.
• Insert the washer (c) and the cup spring (d).
•
Fasten the steering wheel (b) using the hexagon bolt (e).
Make sure the tightening torque is 35 Nm +
Use a torque wrench.
•
Put on the cover.
Fix driver's seat
• Seat with hex screws to fasten seat plate (a).
