AL-KO COMFORT 38.4 LI - Инструкция по эксплуатации - Страница 20

en

Storing the battery-operated lawn mower

20

440807_a

STORING THE BATTERY-OPERATED

LAWN MOWER

Storage

ADVICE

Fold the upper handle bar to save space

during storage

Always store the mower with the battery and

the safety key removed
Store the mower in a dry place and inacces-

sible to children and unauthorized persons

STORING THE BATTERY AND

CHARGER

CAUTION!
Risk of fire and/or explosion!

Do  not  store  the  machine  in  the  vicinity

of naked flames or heat sources.

ADVICE

The battery is protected by a supply vol-

tage  against  overloading  and  can  the-

refore  remain  connected  to  the  mains

power for a lengthy period.

ADVICE

The optimum temperature for storing the

battery is between 0 °C and 25 °C.

Store the battery in dry, frost-protected loca-

tion with an ambient temperature of between

0  °C  and  +25  °C  and  in  a  charged  state  of

approximately 40 - 60%
Recharge  the  battery  for  approximately  2

hours after a 3-month storage period
Do not store the battery near metallic or acid-

containing objects - risk of short-circuiting!

REPAIRS

Repairs  must  only  be  carried  out  at  AL-KO

service centers or authorized specialist firms.
Two  avoid  an  imbalance  the  cutter  unit  and

the retaining screw must only be replaced as

a set.

MAINTENANCE AND CARE

CAUTION!
Danger - risk of injury!

Always  remove  the  safety  key  before

carrying out maintenance work!
Always wear work gloves when carrying

out maintenance on the cutter blade!
Non-balanced  cutter  blades  cause  se-

rious vibrations and damage the mower.

Regularly check the grass catcher system for

correct function and wear
After  mowing,  thoroughly  clean  the  mower

with a hand broom or a cloth. Contamination

left on the underside of the mower can impair

its proper function
Do not hose down the mower with water! Wa-

ter can damage the switch as well as the bat-

tery and the electric motor
Regularly check the cutter blade for damage.

Have  the  blunt  or  damaged  cutter  blades

sharpened or replaced only at an AL-KO ser-

vice center or authorized specialist firm. Re-

sharpened  cutter  blades  must  be  balanced

The tightening torque of the blade screw is 15

Nm +5
Ensure  that  all  nuts,  bolts  and  screws  are

tightened  and  that  the  machine  is  in  a  safe

operational state.
Let  the  motor  cool  down  before  storing  the

machine in a closed room.

CAUTION!

Cutting  blade  and  motor  shaft  may  not

be aligned if damaged!

Professional inspection is necessary:

After running onto an obstacle
When the motor is blocked
When the cutter blade is bent
When the motor shaft is bent
When the battery is damaged, worn out

DISPOSAL

Do not dispose of old

equipment,batteries or accumulators

as householdwaste!

Product, packaging, and accessories

were made with recyclable materials, and

should be disposed of accordingly.