Газонокосилки AL-KO 4236 P-A - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GB
29
470 592_c
Starting manually
without remote throttle control, with choke
Choke
On Off
1. Set the choke at position 1 (
13/1
).
2. Pull in the safety brake handle on the handlebar and
hold it (
17
) – the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind (
18
).
4. When the motor has warmed up (about 15–20
seconds), set the choke to position 2 (
13/2
).
Motor speed (rpm value) is fixed.
Motor speed cannot be adjusted.
without remote throttle control, with primer
(
16
)
1. Press the primer button 3 times at intervals of about
2 seconds (
16
). If the temperature is below
10 °C, press the primer button 5 times.
2. Pull in the safety brake handle on the handlebar and
hold it (
17
) – the brake handle does not lock.
1. Pull out the starter cord sharply, then allow it to
slowly rewind (
18).
Motor speed (rpm value) is fixed.
Motor speed cannot be adjusted.
without remote throttle control, without primer/
choke
2. Pull in the safety brake handle on the handlebar and
hold it (
17
) – the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind (
18
).
Motor speed (rpm value) is fixed.
Motor speed cannot be adjusted.
with remote throttle control, with choke
Remote throttle
control with choke
1. Set the throttle lever to position (
14/1
).
2. Pull in the safety brake handle on the handlebar and
hold it (
17
) – the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind (
18
).
4. When the motor has warmed up (about 15–20
seconds), set the throttle lever to a position
between and
(
14/2
).
with remote throttle control, without primer/choke
Remote throttle
control
Start Stop
5. Set the throttle lever to position (
20/1
).
6. Pull in the safety brake handle on the handlebar and
hold it (
17
) - the brake handle does not lock.
7. Pull out the starter cord sharply, then allow it to
slowly rewind (
18
).
8. When the motor has warmed up (about 15–20
seconds), set the throttle lever to a position
between and
(
20
).
