Газонокосилки AL-KO 40 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
G B
Assem bly
Follow the enclosed assembly instructions.
/ \
C autio n!
Th e machine must not be operated before as-
sembly work has been completed!
Operation
The camera symbol refers to illustrations on
pages 4/5.
Adjusting the cutting height
/ \
D a n g e r - risk o f injury!
Only adjust the cutting height with the motor
switched off and the blade stationary!
Th e method for adjusting the cutting height depends on
the specific model.
C entra l a d ju s tm e n t a
1.
Turn handle approximately 30° clockwise ( t i 1a).
■
For shorter grass, push the handle down.
■
For longer grass, pull the handle up.
2.
Turn handle anti-clockwise, while moving it slightly
up or down until it locks into the desired position.
C entra l a d ju s tm e n t b
1.
Disengage the lever by pushing it to the side and
holding it there ( C l 1b).
■
For shorter grass, push the lever towards the
front wheel.
■
For longer grass, push the lever towards the
rear wheel.
2.
R elease the lever and push it slightly forwards or
backwards until it locks into the desired position.
A x le ad ju s tm e n t
Always adjust both axles to the sam e cutting
height.
1.
Keep the button on the front wheel pressed while
pulling the wheel off the axle ( C l 1c).
2.
Pull out the axle with the remaining wheel and
insert it at the desired cutting height ( a 1d).
3.
Push the removed wheel back on.
T h e wheel must click into place.
4.
R epeat the procedure with the 2nd axle.
W h e e l screw
Always adjust both axles to the sam e cutting
height.
1.
Unscrew the wheel screw by turning it anti-clockwise
and pull the wheel off the axle ( C l 1e). If necessary,
hold onto the second wheel.
2.
Pull out the axle with the remaining wheel and
insert it at the desired cutting height ( a 1f).
3.
Push the removed wheel back on and carefully
screw on the wheel screw. Do not over-tighten.
4.
R epeat the procedure with the 2nd axle.
Attaching the grass collection box
/ ? \ D a n g e r - risk o f injury!
Only remove or attach the grass collection box
with the motor switched off and the blade station-
ary.
1.
Lift the baffle and insert the grass collection box
into the holder.
Level indicator (option)
During mowing, the level indicator is pushed upwards by
the airflow
(Cl
2a). If the grass collection box is full, the
level indicator touches the box
(Cl
2b). Th e grass collec-
tion box must be emptied.
4 7 0 6 2 0 _ a
17
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
