Bosch GDS 18 V-LI - Инструкция по эксплуатации - Страница 16

16

 | English 

1 609 92A 0XT | (19.12.14)

Bosch Power Tools

Noise/Vibration Information

Sound emission values determined according to 
EN 60745-2-2.

Typically the A-weighted noise levels of the product are: 
Sound pressure level 96 dB(A); Sound power level 
107 dB(A). Uncertainty K = 3 dB.

Wear hearing protection!

Vibration total values a

h

 (triax vector sum) and uncertainty K 

determined according to EN 60745:
Impact tightening of fasteners of the maximum capacity of the 
tool: a

h

= 12 m/s

2

, K = 1.5 m/s

2

.

The vibration level given in this information sheet has been 
measured in accordance with a standardised test given in 
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different 
applications, with different accessories or insertion tools or is 
poorly maintained, the vibration emission may differ. This 
may significantly increase the exposure level over the total 
working period.
An estimation of the level of exposure to vibration should also 
take into account the times when the tool is switched off or 
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working 
period.
Identify additional safety measures to protect the operator 
from the effects of vibration such as: maintain the tool and the 
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation 
1194/2012), 2011/65/EU, 2014/30/EU, 2006/42/EC in-
cluding their amendments and complies with the following 
standards: EN 60745-1, EN 60745-2-2.

Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen
GERMANY
15.01.2015

Assembly

Battery Charging



Use only the battery chargers listed on the accessories 
page. 

Only these battery chargers are matched to the lith-

ium-ion battery of your power tool.

Note: 

The battery supplied is partially charged. To ensure full 

capacity of the battery, completely charge the battery in the 
battery charger before using your power tool for the first time.

The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure 
does not damage the battery.

Maximum torque, hard screwdriving 
application according to ISO 5393

– ¼"  hexagon  socket
–



 ½"

Nm
Nm

150*

170

160*

180

Bolt size

mm

M6 – M16

M6 – M16

Tool holder

¼" hexagon socket

/



 ½"

¼" hexagon socket

/



 ½"

Weight according to EPTA-Procedure 
01/2003

kg

1.5/1.7*

1.6/1.8*

Permitted ambient temperature

– during charging
– during operation

**

 and during 

storage

° C

° C

0...+45

-20...+50

0...+45

-20...+50

Recommended batteries

GBA 14,4V..

GBA 18V..

Recommended chargers

AL18..

GAL 3680

AL18..

GAL 3680

Cordless Impact Screwdriver

GDX 14,4 V-LI

GDX 18 V-LI

*depending on the battery pack being used

** Limited performance at temperatures < 0 ° C

Henk Becker
Executive Vice President
Engineering

Helmut Heinzelmann
Head of Product Certification
PT/ETM9

OBJ_BUCH-832-006.book  Page 16  Friday, December 19, 2014  10:44 AM