Bort BSR-12 - Инструкция по эксплуатации - Страница 5

5

Impact Wrench

TECHNICAL DATA  

 1 

OPERATION  

 2 

GENERAL POWER TOOL SAFETY 
WARNINGS

Read all safety warnings and all instructions. 
Failure to follow the warnings and instructions 
may result in electric shock, 

fi

 re and/or serious 

injury. Save all warnings and instructions for 
future reference. The term “power tool” in the 
warnings refers to your mainsoperated (corded) 
power tool or battery-operated (cordless) power 
tool.

WORK AREA SAFETY

●

  Keep work area clean and well lit. Cluttered or 

dark areas invite accidents.

●

  Do not operate power tools in explosive atmo-

spheres, such as in the presence of 

fl

 amma-

ble liquids, gases or dust. Power tools create 
sparks which may ignite the dust or fumes.

●

  Keep children and bystanders away while op-

erating a power tool. Distractions can cause 
you to lose control.

ELECTRICAL SAFETY

●

  Power tool plugs must match the outlet. Nev-

er modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power 
tools. Unmodi

fi

 ed plugs and matching outlets 

will reduce risk of electric shock.

●

  Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges 
and refrigerators. There is an increased risk 
of electric shock if your body is earthed or 
grounded.

●

 Do not expose power tools to rain or wet 

conditions. Water entering a power tool will 
increase the risk of electric shock.

●

  Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges 
and moving parts. Damaged or entangled 
cords increase the risk of electric shock.

PERSONAL SAFETY

●

  Stay alert, watch what you are doing and use 

common sense when operating a power tool. 
Do not use a power tool while you are tired or 
under the in

fl

 uence of drugs, alcohol or medi-

cation. A moment of inattention while operat-
ing power tools may result in serious personal 
injury.

●

 Use personal protective equipment. Always 

wear eye protection. Protective equipment 
such as dust mask, non-skid safety shoes, 
hard hat, or hearing protection used for ap-
propriate conditions will reduce personal in-
juries. Prevent unintentional starting. Ensure 
the switch is in the off-position before con-
necting to power source and/or battery pack, 
picking up or carrying the tool. Carrying power 
tools with your 

fi

 nger on the switch or energis-

ing power tools that have the switch on invites 
accidents.

●

  Remove any adjusting key or wrench before 

turning the power tool on. A wrench or a key 
left attached to a rotating part of the power 
tool may result in personal injury.

●

 Do not overreach. Keep proper footing and 

balance at all times. This enables better con-
trol of the power tool in unexpected situa-
tions.

●

  Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves 
away from moving parts. Loose clothes, jew-
ellery or long hair can be caught in moving 
parts.

POWER TOOL USE AND CARE

●

  Do not force the power tool. Use the correct 

power tool for your application. The correct 
power tool will do the job better and safer at 
the rate for which it was designed.

●

  Do not use the power tool if the switch does 

not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous 
and must be repaired.

●

 Disconnect the plug from the power source 

and/or the battery pack from the power tool 
before making any adjustments, changing ac-
cessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of 
starting the power tool accidentally.