Ryobi RRT1600P-K - Инструкция по эксплуатации - Страница 3

English

1

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

EL

TR

 WARNING

Read all safety warnings and all instructions.

 Failure 

to follow the warnings and instructions may result in 
electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference

.

ROUTER SAFETY WARNINGS

■

Hold power tool by insulated gripping surfaces, 
because the cutter may contact its own cord. 

Cutting a “live” wire may make exposed metal parts of 
the power tool “live” and shock the operator.

■

Use clamps or another practical way to secure and 
support the workpiece to a stable platform.

 Holding 

the work by your hand or against the body leaves it 
unstable and may lead to loss of control.

■

If the product is provided for the connection of dust 
extraction and collecting equipment, ensure these are 
connected and properly used.

■

Always use bits of the correct shank diameter that are 
suitable for the speed of the product.

■

Wear a face or dust mask.

■

Keep mains lead clear from working range of the 
product. Always lead the cable away behind you.

■

Only move the workpiece in counter rotation to cutter 
(only work oppositely oriented).

■

Never reach into the danger area of the machine when 
it is running.

■

Chips and splinters must not be removed while the 
machine is running.

 WARNING

Always feed the product into the workpiece against the 
rotation direction of the bit. If feeding with the rotation 
direction of the bit, the rotational force of the spinning bit 
will tend to throw the tool away from the workpiece. This 
could result in loss of control of the product.

INTENDED USE

■

Cutting grooves and shaping edges in wood.

■

Freehand cutting of letters, grooves and patterns in 
wood

■

Chamfering, rabbeting, dadoing and dovetailing in 
wood.

Do not use this product in any way other than those stated 
for intended use.

MAINTENANCE

 WARNING

The product should never be connected to a power supply 
when you are assembling parts, making adjustments, 
cleaning, performing maintenance, or when the product 
is not in use. Disconnecting the product will prevent 
accidental starting that could cause serious injury.

 WARNING

When servicing use only original manufacturer’s 
replacement parts. Use of any other parts may create a 
hazard or cause product damage.

■

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to various types of commercial 
solvents and may be damaged by their use. Use clean 
cloths to remove dirt, carbon dust, etc.

 WARNING

Do not at any time let brake 

fl

 uids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact 
with plastic parts. They contain chemicals that can 
damage, weaken or destroy plastic.

■

Electric tools used on fiberglass material, wallboard, 
spackling compounds, or plaster are subject to 
accelerated wear and possible premature failure 
because the fiberglass chips and grindings are highly 
abrasive to bearings, brushes, commutators, etc. 
Consequently, we do not recommend using this tool for 
extended work on these types of materials. However, if 
you do work with any of these materials, it is extremely 
important to clean the product using compressed air.

 WARNING

Always wear safety goggles or safety glasses with side 
shields during power tool operation or when blowing 
dust. If operation is dusty, also wear a dust mask.

■

If the power supply cord is damaged, it must be replaced 
only by the manufacturer or by an authorized service 
center to avoid risk. Contact authorized service center.

■

For greater safety and reliability, all repairs should be 
performed by an Authorised Ryobi Service Centre.

LUBRICATION

All of the bearings in the product are lubricated with a 
suf

fi

 cient amount of high grade lubricant for the life span of 

the product under normal operating conditions. Therefore, 
no further lubrication is required.