Bort BOF-2100 - Инструкция по эксплуатации - Страница 9

9

•  Avoid body contact with earthed or grounded surfaces, 

such as pipes, radiators, ranges and refrigerators . There is 

an increased risk of electric shock if your body is earthed 

or grounded .

•  Do not expose power tools to rain or wet conditions . Wa-

ter entering a power tool will increase the risk of electric 

shock .

•  Do not abuse the cord . Never use the cord for carrying, 

pulling or unplugging the power tool . Keep cord away 

from heat, oil, sharp edges and moving parts . Damaged 

or entangled cords increase the risk of electric shock .

•  When operating a power tool outdoors, use an extension 

cord suitable for outdoor use . Use of a cord suitable for 

outdoor use reduces the risk of electric shock .

•  If operating a power tool in a damp location is unavoida-

ble, use a residual current device (RCD) protected supply . 

Use of an RCD reduces the risk of electric shock .

Personal safety

•  Stay alert, watch what you are doing and use common 

sense when operating a power tool . Do not use a power 

tool while you are tired or under the influence of drugs, 

alcohol or medication . A moment of inattention while 

operating power tools may result in serious personal 

injury .

•  Use personal protective equipment . Always wear eye 

protection . Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce personal in-

juries .

•  Prevent unintentional starting . Ensure the switch is in 

the off-position before connecting to power source and/

or battery pack, picking up or carrying the tool . Carrying 

power tools with your finger on the switch or energising 

power tools that have the switch on invites accidents .

•  Remove any adjusting key or wrench before turning the 

power tool on . A wrench or a key left attached to a rotat-

ing part of the power tool may result in personal injury .

•  Do not overreach . Keep proper footing and balance at 

all times . This enables better control of the power tool in 

unexpected situations .

•  Dress properly . Do not wear loose clothing or jewellery . 

Keep your hair, clothing and gloves away from moving 

parts . Loose clothes, jewellery or long hair can be caught 

in moving parts .

•  If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected 

and properly used . Use of dust collection can reduce 

dust-related hazards .

Power tool use and care

•  Do not force the power tool . Use the correct power tool 

for your application . The correct power tool will do the 

job better and safer at the rate for which it was designed .

•  Do not use the power tool if the switch does not turn it 

on and off . Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired .

•  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any ad-

justments, changing accessories, or storing power tools . 

Such preventive safety measures reduce the risk of start-

ing the power tool accidentally .

•  Store idle power tools out of the reach of children and do 

not allow persons unfamiliar with the power tool or these 

instructions to operate the power tool . Power tools are 

dangerous in the hands of untrained users .

•  Maintain power tools . Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation . If 

damaged, have the power tool repaired before use . Many 

accidents are caused by poorly maintained power tools .

•  Keep cutting tools sharp and clean . Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control .

•  Use the power tool, accessories and tool bits etc . in ac-

cordance with these instructions, taking into account the 

working conditions and the work to be performed . Use 

of the power tool for operations different from those in-

tended could result in a hazardous situation .

Service

Have your power tool serviced by a qualified repair person 

using only identical replacement parts . This will ensure that 

the safety of the power tool is maintained .

SAFETY WARNINGS FOR ROUTERS

•  Hold power tool by insulated gripping surfaces, because 

the cutter may contact its own cord . Cutting a “live” wire 

may make exposed metal parts of the power tool “live” 

and shock the operator .

•  Use clamps or another practical way to secure and sup-

port the workpiece to a stable platform . Holding the 

work by your hand or against the body leaves it unstable 

and may lead to loss of control .

•  The allowable speed of the router bit must be at least as 

high as the maximum speed listed on the power tool . 

Accessories that rotate faster than permitted can be de-

stroyed .

•  Router bits or other accessories must fit exactly in the 

tool holder (collet) of your machine . Routing bits that do 

not fit precisely in the tool holder of the machine rotate 

irregularly, vibrate heavily and can lead to loss of control .

•  Apply the machine to the workpiece only when switched 

on . Otherwise there is danger of kickback when the cut-

ting tool jams in the workpiece .

•  Keep your hands away from the routing area and the 

router bit . Hold the auxiliary handle or the motor hous-

ing with your second hand . When both hands hold the 

machine, they cannot be injured by the router bit .

•  Never cut over metal objects, nails or screws . The router 

bit can become damaged and lead to increased vibra-

tions .

•  Use appropriate detectors to determine if utility lines are 

hidden in the work area or call the local utility company 

for assistance . Contact with electric lines can lead to fire 

and electric shock . Damaging a gas line can lead to ex-

plosion . Penetrating a water line causes property dam-

age .

•  Do not use blunt or damaged router bits . Blunt or dam-

aged router bits cause increased friction, can become 

jammed and lead to imbalance .

•  When working with the machine, always hold it firmly 

with both hands and provide for a secure stance . The 

power tool is guided more secure with both hands .

•  Always wait until the machine has come to a complete 

stop before placing it down . The tool insert can jam and