AEG OF 2050 E - Инструкция по эксплуатации - Страница 12

22

23

....................... 2050 W

..........10000-20000 min

-1

........................... 66 mm

................... 6, 8, 12 mm

........ 1/4", 3/8", 1/2" 

........................... 50 mm

.......................... 6,2 kg

........................... 96 dB (A)

......................... 107 dB (A)

............................. 7 m/s

2

.......................... 1,5 m/s

2

ENGLISH

MAINTENANCE

The ventilation slots of the machine must be kept clear at all 

times.
Use only AEG accessories and AEG spare parts. Should 

components need to be replaced which have not been 

described, please contact one of our AEG service agents 

(see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. 

Please state the Article No. as well as the machine type 

printed on the label and order the drawing at your local 

service agents or directly at: AEG Elektrowerkzeuge, 

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

SYMBOLS

Please read the instructions carefully before 

starting the machine.

Always disconnect the plug from the socket 

before carrying out any work on the machine. 

Accessory - Not included in standard equipment, 

available as an accessory.

Do not dispose of electric tools together with 

household waste material! In observance of 

European Directive 2002/96/EC on waste 

electrical and electronic equipment and its 

implementation in accordance with national law, 

electric tools that have reached the end of their 

life must be collected separately and returned to 

an environmentally compatible recycling facility.

ENGLISH

TECHNICAL DATA

Rated input ..............................................................................

No-load speed .........................................................................

Cage stroke .............................................................................

Collet diameter max.................................................................

Collet diameter max.(UK) ........................................................

Router diameter .......................................................................

Weight .....................................................................................

Noise/vibration information

Measured values determined according to EN 60 745.

Typically, the A-weighted noise levels of the tool are:

  Sound power level (K = 3 dB(A)) ............................................

  Sound pressure level (K = 3 dB(A)) .......................................

Wear ear protectors!

Total vibration values (vector sum in the three axes) 

determined according to EN 60745.

  Vibration emission value a

h

...................................................

  Uncertainty K ........................................................................ 

 WARNING! Read all safety warnings and all 

instructions, including those given in the accompanying 

brochure

. Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury. 

Save all warnings and instructions for future reference. 

SAFETY INSTRUCTIONS

Wear ear protectors. 

Exposure to noise can cause hearing 

loss.
Appliances used at many different locations including open 

air must be connected via a residual current operated 

device (FI, RCD, PRCD).
Always wear goggles when using the machine. It is 

recommended to wear gloves, sturdy non slipping shoes 

and apron. 
Always disconnect the plug from the socket before carrying 

out any work on the machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine. 

Always lead the cable away behind you.
Never reach into the danger area of the plane when it is 

running.
Always use the protective shields on the machine.
Only use tools whose permitted speed is at least as high as 

the highest no-load speed of the machine.
Sawdust and splinters must not be removed while the 

machine is running.
Only use professionally grinded router cutters.
Only use router cutter with correct shank diameter.
The workpieces should be clamped down before cutting.
Put the router back to original position after usage (loosen 

clamping lever to secure cage).
Only move the workpiece in counter rotation to cutter (only 

work oppositely oriented)! For security, use devices such as 

safety- and pressure device, guide slide, rip fence, etc.

The dust that arises when working with this tool can be 

detrimental to health (e.g. when working oak or bECh wood, 

stones, paint, which could contain lead or other harmful 

chemicals) and therefore not reach the body. Use a dust 

absorption system and wear a suitable dust protection 

mask. Remove deposited dust thoroughly, e.g. with a 

vacuum cleaner.
Under the effect of extreme electromagnetic interferences 

from the outside, temporary variations in the speed of 

rotation could arise in particular cases.

SPECIFIED CONDITIONS OF USE

The router can be used for rabbeting, rounding off, 

chamfering, routing of edges, as well as pitting in wood and 

plastic.
Do not use this product in any other way as stated for 

normal use.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is 

in conformity with the following standards or standardized 

documents. EN 60745, EN 55014-1, EN 55014-2, 

EN 61000-3-2, EN 61000-3-3, in accordance with the 

regulations 98/37/EC, 2004/108/EC

Rainer Kumpf

Manager Product Development

Winnenden, 2008-12-01

MAINS CONNECTION

Connect only to single-phase a.c. current and only to the 

system voltage indicated on the rating plate. It is also 

possible to connect to sockets without an earthing contact 

as the design conforms to safety class II.

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given 

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different 

applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase 

the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or 

when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the 

accessories, keep the hands warm, organisation of work patterns.