Vitek VT-8231 - Инструкция по эксплуатации - Страница 3

Фены Vitek VT-8231 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 20
Загружаем инструкцию
background image

3

ENGLISH          

HAIR DRYER VT-8231
The hairdryer is intended for hair drying and styling.

DESCRIPTION

1. 

Air supply speed switch (0\ \ )   

2. 

Heating degree switch ( / / )  

3. 

Cool shot button     

4. 

Concentrator nozzle

5. 

Removable air inlet grid

6. 

Hanging loop

ATTENTION! Do not use the unit near water in the 
bathrooms, showers, swimming pools etc.
•  When  using  inside  a  bathroom,  always  discon-

nect  the  appliance  from  wall  outlet  after  usage; 
in particular, unplug power cord from wall outlet, 
as proximity to water is dangerous even if the ap-
pliance is switched off.

•  For  additional  protection,  it  is  reasonable  to  in-

stall residual current device (RCD) with rated op-
erating current no higher then 30 mA into power 
supply circuit of your bathroom. Apply to compe-
tent specialist for installation.

SAFETY PRECAUTIONS
Before using the electrical unit, read this instruction 
manual carefully and keep it for future reference.
Use the unit for its intended purpose only, as speci-
fied in this manual. Mishandling of the unit may lead 
to its breakage and cause harm to the user or dam-
age to his/her property.

 

Before switching the unit on, make sure that the 
voltage  of  the  mains  corresponds  to  the  unit 
operating voltage.

 

Never leave the operating unit unattended.

 

Do not switch the unit on in places where aero-
sols are sprayed or highly flammable liquids are 
used.

 

Hair  spray  should  be  applied  only  after  hair 
straightening is finished.

 

Always  unplug  the  unit  after  usage  and  before 
cleaning.

 

When  unplugging  the  unit,  pull  the  plug  but  not 
cord.

 

Do  not  touch  the  unit  body  and  the  power  plug 
with wet hands.

 

Do  not  hang  or  keep  the  unit  in  places  where 
it  can  fall  into  a  bath  or  a  sink  filled  with  water;  
do  not  immerse  the  unit  body,  power  cord  or 
power plug into water or other liquids.

 

Do not use the unit while taking a bath.

 

If the unit is dropped into water, unplug it imme-
diately and only then take it out of water.

 

For  children  safety  reasons  do  not  leave  poly-
ethylene  bags  used  as  a  packaging  unat-
tended.

Attention!  Do  not  allow  children  to  play  with  poly-
ethylene  bags  or  packaging  film.  Danger  of  suf-
focation!

 

Do not allow children to touch the unit body, the 
power  cord  or  the  power  plug  during  operation 
of the unit.

 

Do  not  leave  children  unattended  to  prevent 
them from using the unit as a toy.

 

Close  supervision  is  necessary  when  children 
or  people  with  disabilities  are  near  the  operat-
ing unit.

 

This unit is not intended for usage by children.

 

During the unit’s operation and breaks between 
operation  cycles,  keep  the  unit  away  from  chil-
dren.

 

The  unit  is  not  intended  for  usage  by  physi-
cally  or  mentally  disabled  persons  (including 
children)  or  by  persons  lacking  experience  or 
knowledge  if  they  are  not  under  supervision  of 
a  person  who  is  responsible  for  their  safety  or 
if  they  are  not  instructed  by  this  person  on  the 
usage of the unit.

 

Do not use the unit when you are drowsy.

 

Do not use the unit to straighten wet hair or syn-
thetic wigs.

 

Avoid contact of heated surfaces with your face, 
neck and other parts of your body.

 

Do  not  put  the  operating  unit  on  heat-sensitive 
or  soft  surfaces  (for  instance,  bed  or  sofa)  and 
do not cover the unit.

 

It is recommended to unwind the power cord to 
its full length while using the unit.

 

The power cord should not:

– 

touch hot objects;

– 

run over sharp edges;

– 

be used as a handle for carrying the unit.

 

Regularly check the integrity of the power cord.

 

To avoid damages, transport the unit in the origi-
nal package only.

 

Do not use the unit if the power plug or the power 
cord  is  damaged,  if  the  unit  works  improperly 
and  after  it  was  dropped.  If  the  power  cord  is 
damaged,  it  should  be  replaced  by  the  manu-
facturer,  service  or  similar  qualified  personnel 
to avoid danger.

 

Do  not  attempt  to  repair  the  unit.  Do  not  disas-
semble the unit by yourself, if any malfunction is 
detected or after it was dropped, unplug the unit 
and apply to any authorized service center at the 

IM VT-8231.indd   3

08.02.2019   17:47:55

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Vitek VT-8231?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"