Фены VITEK VT-1318 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12. Attachments may be hot during use. Allow them to cool before
handling.
13. Do not place appliance on any surface while it is operating.
14. While using the appliance, keep your hair out of it. Keep your hair
away from the air inlets.
15. Do not use with voltage converter.
ATTACHMENTS
1. Cool/High/Low/Off switch setting
2. Release button for attachment
3. Turbo button
4. Retractable thermal brush
5. Concentrator
6. Volume finger
SWITCH SETTINGS
O Off
1 For extra gentle styling
of the hair
2 For fast and intensive styling of the hair
C Cool air
OPERATION
As a general guide, use the HIGH heat and speed settings for rough
drying and for thicker, heavier hair. Use the LOW heat and speed set
tings for finer hair and for more precise control when styling. The
Cool Shot feature is used at the end to set the style.
This styler is fitted with a turbo button that located underneath the
release button. By depressing the turbo button, the styler fan speed
will increase to generate more airflow for a short period of time. This
turbo feature helps to decrease drying time. Depress the button and
hold it for no longer than three (3) minutes at a time. When finger is
released from the button the styler will automatically resume the tem
perature and speed previously chosen.
1. To switch the styler OFF, move the switch to the "0" position.
ENGLISH
3
10
1318.qxd 11.07.03 10:15 Page 6
