Фены Saturn ST-HC7217 New - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GB
HAIR DRYER
Dear Buyer!
We congratulate you on having
bought the device under trade
name “Saturn”. We are sure that
our devices will become faithful
and reliable assistance in your
housekeeping.
Avoid extreme temperature
changes. Rapid temperature change
(e.g. when the unit is moved from
freezing temperature to a warm
room) may cause condensation
inside the unit and a malfunction
when it is switched on. In this case
leave the unit at room temperature
for at least 1.5 hours before
switching it on.
If the unit has been in transit, leave
it indoors for at least 1.5 hours
before starting operation.
PARTS INDICATION
1. Air Exit Grill
2. Air Inlet Grill
3. Nozzle
4. Cool switch
5. Off/low-
speed/high-
speed
6.Cool/warm/hot
7.Handle
8.Power Cord
9.Hanging Loop
Safety measures
1. Connect the dryer to 220-230 V
outlet.
2. Never use in the bathtub, shower or
over a filled sink.
3. Do not use solvents, detergents /
cleaners or abrasive materials to clean
the device.
4. Never lay it down on a pillow or
blanket when in use.
5. Make sure that the air inlet and air
exit grills are free when using the unit.
The dryer is protected against
overheating. If the air inlet is accidently
covered, the dryer will stop
automatically. Switch off and allow to
cool down for a few minutes before
attempting to restart.
6. Disconnect after use.
7. Children are not aware of potential
hazards. Do not allow children to
operate this appliance.
8. Service life – 2 years.
Using the dryer
When making up your hair, you can use
this one with concentrator nozzle.
1. There are two switches (0/I/II) on
the handle. One (above) regulates the
speed of the motor (and thus the
airflow), by pressing the I or II, I file for
a slow, II file for high speed, O file for
turning off the power supply. The other
switch (below) regulates three different
temperatures, 0 for cool wind, I for
warm and II for hot.
2. After washing, towel your hair and
then use the dryer. Plug in appliance
and select the switch position for the
right temperature and airflow.
3.Once your hair is dry set the switch
off “0” position and unplug the dryer.
4. Select the cool shot position. Using
cool shot has a good protection on hair,
which has been dried and made up.
Cleaning your dryer
Please always disconnect your dryer
before cleaning.
Do not immerse in water.
From time to time remove dust and hair
from the air inlet grill with a small
brush.
You can clean your appliance with a
slightly damp cloth and dry it up with a
dry cloth.
Warning:
This appliance is not intended for
use by persons (including children) with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
Do not use this appliance near
water in bathtubs, basins or other
vessels.
Do not pull the cord with
unnecessary force. Do not damage or
3