Gamma Piu 5555 Turbo Tormalionic - Инструкция по эксплуатации - Страница 9

9

Connect the plug to the socket.
The hair dryer has 3 temperature levels and 2 air flow speeds, selectable via separate 
switches.  If the appliance is fitted with cold air button 

[C]

, you can operate it for 

hairstyling.
Switch on the appliance using the On/Off switch 

[A] 

and select the required speed:

0   0 = 

OFF

   I =

 mid air flow

   II =

 strong air flow

Press the button to adjust the temperature 

[B] 

and select the level you prefer:

  I =

 low temperature

   II = 

mid temperature

   III =

 high temperature

After use, using the On/Off switch 

[A]

 to switch off the appliance.

Do not pull the cord or the appliance to disconnect the power cord 

[G]

 from the 

mains socket. 

Store the appliance on a stable surface, paying attention not to wrap the 

cord around the appliance.

Cold air button (Cold Shot) [C]

If the appliance is fitted with this button, you can operate it for hairstyling.
Holding the cold air button pressed, the dryer can be switched quickly to operate 
with cold air and for hairstyling.
To return to the set temperature, simply release the button.

Using the air concentrator [H]

Thanks to the concentrator, the air is conveyed directly on the brush used for the 
hairstyle.
Apply the concentrator and press it in towards the body of the hair dryer 

(Fig. 3a)

. 

The concentrator can be retrieved by pulling it in the direction indicated by the arrow 
b 

(Fig. 3b)

.

Wait until the nozzle has cooled down before removing it.

Using the air diffuser [I]

If the appliance has been equipped with the diffuser, this can be used to obtain a 
volumising drying.
Apply the diffuser and press it in towards the body of the hair dryer 

(Fig. 4a)

.

The concentrator can be retrieved by pulling it in the direction indicated by the arrow 
b 

(Fig. 4b)

.

MAINTENANCE

In case of malfunction or damage to the appliance or a part of it, 

the appliance must be analysed by the manufacturer or the relevant 

technical assistance or in any case by a person with similar skills in 

order to prevent any risk. The user must not disassemble the device 

him/herself.

Remove the plug from the mains socket before cleaning the 

appliance.

GENERAL CLEANING

Clean the appliance at least once a week.
To avoid all risk of electric shock, do not clean the appliance with water and do not 
dip It into water.
Only wipe the appliance with a soft cloth, dampened if necessary. 
Do not use solvents or abrasive detergents!

FILTER CLEANING

To maintain optimum performance of the device  over time, you should clean the 
filter regularly

 [E]

:

•  every day for intensive and continuous use
•  twice a week for normal use
•  once a month when used occasionally.
To do this proceed as follows:
1.  Rotate the filter counter-clockwise 

(Fig. 5a)

 and remove it.

2.  Rotate the filter grill where provided 

(Fig. 5b)

.