BRAYER BR3000BN - Инструкция по эксплуатации - Страница 6

6

EN

•  Wipe the unit with a clean, slightly damp cloth to 

remove dust, and then wipe it dry. 

•  Unwind the power cord to its full length while using 

the unit.

USING THE HAIRDRYER

•  Make sure that the operation mode switch (1) is set 

to the position «0».

•  Unwind the power cord completely.

•  Insert the power plug into the mains socket.

• 

Use the switch (1) to set the required operation 

mode:

 -

«0» — the hot air styler is switched off;

 -

«1» — warm air supply;

 - «2» — hot air supply.

•  The button (2) is the cool shot function «   », press 

and hold down the «cool» shot button for fixing your 

hairstyle.

• 

Note: 

— during the first operation a foreign smell 

and a small amount of smoke can appear from the 

heating element, this is normal and it is not covered 

by warranty.

• 

– After unit operation, switch the hairdryer off by 

setting the switch (1) to the position «0», and unplug 

it.

NOZZLE

•  Use the nozzle (3) when you need to focus the power 

of drying on a small area (for example, a curl or a 

wave) or when you want to straighten wavy hair.

•  Attach the nozzle (3) to the unit body. The nozzle (3) 

allows directing a narrow air flow of high intensity at a 

definite hair lock.

•  Insert the power plug into the mains socket. Use the 

switch (1) to set the necessary operation mode.

• 

When the desired effect is achieved, press the cool 

shot button (3) and fix your hairstyle.

•  Periodically straighten the power cord if it gets 

twisted during operation.

OVERHEATING PROTECTION

• 

Overheating protection switches the hairdryer off if 

the outgoing air is too hot.

• 

If the hot air styler is switched off during operation, 

set the switch (1) to the position «0», unplug the 

unit and make sure that the air inlets and outlets are 

unblocked.

•  Let the unit cool down for 5-10 minutes and switch it 

on again. Do not block the air inlets during operation 

of the hot air styler and

•  avoid getting of hair into the air inlet grid (5).

CLEANING AND  MAINTENANCE

•  The hairdryer is intended for household use only.

•  Set the switch (1) to the «0» position, disconnect the 

hairdryer from the mains and let it cool down. 

•  Wipe the unit body (4) with a slightly damp cloth, and 

then wipe it dry.