BRAYER 3002BR - Инструкция по эксплуатации - Страница 4

6

7

en

en

•  Make sure that the indicated specifications of the 

power supply of the hairdryer correspond to the 

specifications of your mains. When connecting the 

hairdryer to the mains with 60 Hz frequency, the unit 

does not need any additional measures.

•  Wipe the hairdryer body (5) and the nozzle (4) with a 

clean, slightly damp cloth and then wipe them dry. 

USING THE HAIRDRYER

Before connecting the power plug to the mains 

make sure that the operating voltage of the 

hairdryer corresponds to the voltage of your mains.

•  Insert the power plug into the mains socket.

•  Set the required air flow speed with the switch (1):

- «0» — the hairdryer is off;

-

« 

 » — low air flow speed;

-

« 

 » — high air flow speed.

•  Set the required air flow temperature with the switch 

(2):

-

« 

 » — low temperature;

-

« 

 » — medium temperature;

-

« 

 » — maximal temperature.

HAIR DRYING

•  Set the switch (2) to the medium «   » or maximal 

« 

 » position and select the required air flow speed 

with the switch (1).

•  During the operation hold the hairdryer by the handle 

(7).

•  Move the hairdryer above your hair and remove 

excessive moisture from your hair with your hand or 

a comb.

• 

Note:

 during the first operation a foreign smell and a 

small amount of smoke can appear from the heating 

element, this is normal and it is not covered by 

warranty.

NOzzLE ATTACHMENT (4)

•  Use the nozzle (4) when you need to concentrate 

drying on a small area, for example, a separate hair 

lock, or when you need to straighten wavy hair.

•  Attach the nozzle (4) to the hairdryer body (5). 

•  Insert the power plug into the mains socket. Set the 

required air flow speed mode with the switch (1) and 

the required air flow temperature with the switch (2).

COOL SHOT

•  Use the «cool shot» function for fixing your hairstyle.

•  When the desired effect is achieved, press and 

hold the «cool shot» button (3) «   » and fix your 

hairstyle.

•  After finishing operation, switch the hairdryer off by 

setting the switch (1) to the position «0», and unplug 

it.

•  For easy storing there is a hanging loop (8), you can 

hang the hairdryer on this loop provided that no water 

gets on the unit in this position.

•  Keep the unit in a dry cool place out of reach of 

children and disabled persons.

DILIVERY SET

1. 

Hairdryer — 1 pc.

2. 

Nozzle — 1 pc.

3. 

Manual — 1 pc.

TECHNICAL SPECIFICATIONS

•  Power supply: 220-240 V, ~ 50-60 Hz

•  Rated input power: 1800-2200 W

OVERHEATING PROTECTION

•  The overheating protection system switches the 

hairdryer off if the outgoing air temperature is above 

the limit.

•  If the hairdryer is switched off during operation, 

unplug the unit and make sure that the air inlets and 

outlets are unblocked.

CLEANING AND MAINTENANCE

The hairdryer is intended for household use only.
•  Switch the hairdryer off by setting the switch (1) 

to the position «0», unplug it and wait until the 

hairdryer cools down. 

•  Wipe the hairdryer body (5) and the nozzle (4) with 

a slightly damp cloth and then wipe them dry.

•  Clean the air inlet grid (6) with a brush.

•  Do not immerse the unit into water or any other 

liquids.

•  Do not use abrasives and solvents to clean the 

hairdryer body (5) and the nozzle (4).

STORAGE

•  Disconnect the hairdryer from the mains and clean 

it.

•  Do not wind the power cord around the hairdryer 

body as it may damage the power cord or the 

hairdryer body.

ATTENTION! 

Do not use the unit near water in the 

bathrooms, showers, swimming pools etc.