BRAYER 3001BR - Инструкция по эксплуатации - Страница 4

6

7

en

en

•  Make sure that the indicated specifications of the 

power supply of the hairdryer correspond to the 

specifications of your mains. When connecting the 

hairdryer to the mains with 60 Hz frequency, the unit 

does not need any additional measures.

•  Wipe the hairdryer body and the attachments (5, 6, 

7) with a clean, slightly damp cloth and then wipe 

them dry.

USING THE HAIRDRYER

• 

Note: 

the control buttons (1, 2, 3) are sensory. Just 

touch the buttons to switch the hairdryer on or to set 

the operating mode.

•  Unwind the power cord at full length.

•  Insert the power plug into the mains socket.

•  Press and hold the on/off button (1) «   » for 3 

seconds, the hairdryer will switch on.

• 

Note: 

during the first operation a foreign smell and a 

small amount of smoke can appear from the heating 

element, this is normal and it is not covered by 

warranty.

•  Touch the temperature/air flow speed setting panel 

(2) to set the required operating mode. The operating 

mode is shown on the display (9) with the symbols 

(11, 12, 13). You can set 6 speed and 8 temperature 

operating modes. 

•  After selecting the operating mode touch the lock 

button (3) «   », the symbol (14) will appear on the 

display (8) and the operating mode setting panel (2) 

will be locked. To change the operating mode touch 

the button (3) «   » again, the symbol (14) on the 

display (9) will go out.

•  To switch the «cool shot» mode on, press and hold 

the button (4) «   » the symbols «COOL» will appear 

on the display (9). Use the «cool shot» function for 

fixing your hairstyle.

• 

Note:

 while the hairdryer is operating in the «cool 

shot» mode, the display (9) will show only the air flow 

speed symbols (11).

•  After you finish using the hairdryer, switch it off by 

pressing and holding the on/off button (1) «   » and 

then unplug the unit.

NOzzLE

•  Attach the nozzle (5) to the hairdryer body. The 

nozzle (5) directs a narrow air flow on a selected hair 

lock.

•  Insert the power plug into the mains socket. Switch 

the hairdryer on and set the required operating 

mode by touching the operating mode setting panel 

(2). Lock the operating mode setting panel (2) by 

touching the button (3) «   ». If you need to switch 

to another operating mode, unlock the operating 

mode setting panel (2) by touching the button (3) « 

 » again.

•  When the desired effect is achieved, press and 

hold the «cool shot» button (4) «   » and fix your 

hairstyle.

OvERHEATING PROTECTION

•  The overheating protection system switches the 

hairdryer off if the outgoing air temperature is above 

the limit.

•  If the hairdryer is switched off during operation, 

unplug the unit and make sure that the air inlets and 

outlets are unblocked.

CLEANING AND MAINTENANCE

•  The hairdryer is intended for household use only.

•  Switch the hairdryer off by pressing and holding the 

on/off button (1) «   », unplug it and wait until the 

hairdryer cools down.

•  Wipe the hairdryer body and the attachments (5, 

6, 7) with a slightly damp cloth and then wipe them 

dry.

•  Clean the air inlet grid (8) with a brush.

•  Do not immerse the unit into water or any other 

liquids.

•  Do not use abrasives or solvents to clean the 

hairdryer body and the attachments (5, 6, 7).

STORAGE

•  Disconnect the hairdryer from the mains and clean 

it.

•  Do not wind the power cord around the hairdryer 

body as it may damage the power cord or the 

hairdryer body.

•  Periodically straighten the power cord if it gets 

twisted during operation.

•  After you finish using the hairdryer, switch it off by 

pressing and holding the on/off button (1) «   » and 

then unplug the unit.

DIFFUSER

•  The diffuser (6) is used for different hairstyles. You 

can add volume at the hair roots or throughout the 

hair length, create romantic curls and waves etc. with 

the diffuser (6).

•  Attach the diffuser (6) to the hairdryer body.

•  Switch the hairdryer on and set the required 

operating mode by touching the operating mode 

setting panel (2).

•  After you finish using the hairdryer, switch it off by 

pressing and holding the on/off button (1) «   » and 

then unplug the unit.

AIR ATTACHMENT «TORNADO»

•  The air attachment «TORNADO» (7) creates a 

whirling hot air flow which doesn’t make a «hot spot». 

This allows to dry hair carefully while styling.

•  Attach the air attachment (7) to the hairdryer body.

•  Switch the hairdryer on and set the required 

operating mode by touching the operating mode 

setting panel (2).

•  After you finish using the hairdryer, switch it off by 

pressing and holding the on/off button (1) «   » and 

then unplug the unit.