Beurer HC 30 - Инструкция по эксплуатации - Страница 17

16

17

 Note

A slight odour initially develops after switching on the device for the first time. This is normal and not 

harmful to your health. Allow the device to run for three to five minutes. After that you can use the 

device as normal.

7. Usage

Drying the hair

>

 Switch on the hair dryer using the blower switch [6]. 

  1  Gentle air flow
  2  Strong air flow

>

 Select the heat setting using the heat setting switch [5]:

  1  Low temperature
  2  Medium temperature
  3  High temperature

>

 Dry and/or style your hair as desired.

After each use/at each break, always switch off the hair dryer at the blower switch [6] (setting 0)
>

 For your safety, the device switches off automatically if it overheats.

>

 Pull the mains plug out of the socket and allow the device to cool down.

>

 Before switching on again, check the air outlet [2] and the filter [3] for blockage (e.g. fluff, dust and hair 

that has been sucked in). 

>

 Do not place the device on or near wet towels after use.

Selecting the function

The hair dryer has a cool setting that can be selected using the cold air button [4]:

Function

Description

The cold setting provides the perfect finish for styling. It cools your hair down 

and adds hold for an improved result.

The cold setting can be activated at any time by pressing and holding the 

button [4]. Once you release the button, the device returns to the previously 

selected heat setting.

After use

•  After each use, pull the mains plug out of the socket.
•  Allow the device to cool down.
•  Do not wind the mains cable around the device!
•  Store the device in a dry place out of the reach of children.
•  The device can be hung on a hook using the hanging eyelet [7].