Philips BRI977/00 - Инструкция по эксплуатации - Страница 27

27

English

Note: The battery capacity is not enough for a full body treatment. We

recommend you to use the device corded while treating large body areas

such as legs.

Using your Lumea Series 9000 before and after

tanning

Tanning with natural or artificial sunlight

Intentionally exposing your skin to natural or artificial sunlight with the aim
of developing a tan influences the sensitivity and color of your skin.
Therefore the following is important:
- After each treatment, wait at least 48 hours before tanning. Even after

48 hours, make sure that the treated skin does not show any redness
from the treatment anymore.

- If you expose your skin to the sun (without tanning intentionally) in the

48 hours after treatment, use a sunblock SPF 50+ on the treated areas.
After this period, you can use a sunblock SPF 30+ for two weeks.

- After tanning, wait at least 2 weeks before you use Lumea Series 9000

and perform a skin test. This is to determine the appropriate light
intensity setting (see 'B Test skin 24 hrs before treatment').

- Do not use Lumea Series 9000 on sunburned body areas.

Note: Occasional and indirect sun exposure does not qualify as tanning.

Tanning with creams

If you have used an artificial tanning lotion, wait until the artificial tan is
completely gone before you use the device.

Traveling with the device

When you travel with the device, check with the airplane carrier to confirm
that the device can be carried and/or used on the airplane.

After use

Aftercare

After use, you can apply lotions, creams, deodorant, moisturizer or
cosmetics to the treated areas. 

Warning: If you experience skin irritation or skin redness after

treatment, wait until it disappears before you apply any product

to your skin. If you experience skin irritation after applying a

product to your skin, wash it off with water. If you still get skin

reactions, stop using the device and consult your doctor.