Beurer HL 40 - Инструкция по эксплуатации - Страница 12

Эпиляторы Beurer HL 40 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 56
Загружаем инструкцию
background image

12

 WARNING: Fire hazard

There is a risk of fire if the device is used incorrectly or if it is not used according to these operating 

instructions.

For this reason, the massage device must only be operated as follows:

• Never leave the device unsupervised, particularly if children are around.

• Never use the device under covers, such as blankets or pillows.

• Never use the device in the vicinity of petrol or other easily flammable materials.

5. Device description

1. Base station

2. Charger contacts

3. Base station protective cap

4. Base device/applicator

5. Indicator lamp

6. Fill level display

7. Protective cap for applicator

8. Warm wax cartridges (2 pcs.)

9. On/Off switch

1

6

9

3

7

2

4

5

8

6. Initial use

• Remove the packaging.

• Check the device, power supply and cables for damage.

• Connect the device to the mains power. The device must be switched off at this time.

• Route the cable safely so that there is no risk of anyone tripping over it.

• Switch on the device using the On/Off switch.

• Place the applicator on the base station and insert the second wax cartridge into the separate heating 

chamber as shown in the image. 

• The indicator lamp flashes while heating is taking place. Once the wax has heated fully, the indicator 

lamp then remains continuously lit. This process lasts approx. 25–30 minutes.

• As soon as the wax is hot, roll the wax roller until it rotates without any problems.

• If you are using a warm wax hair remover for the first time, please refer to the instructions to ensure you 

are using it correctly.

• In order to become accustomed to the hair removal system and to ensure that you are not allergic to it, 

it is preferable to start with a small area on the lower part of the leg. Then wait 24 hours before carrying 

out the complete hair removal process.

• The skin must be clean and dry prior to carrying out hair removal.

 NOTE

• The wax cartridge contains 50 ml wax. This quantity is sufficient for two half legs and a small 

   number of follow-up treatments. The more practice you get the less wax you will need to use. 

• In order to ensure optimum hygiene and cleanliness, the wax roller and the warm wax cartridge 

   have been designed for single use and must be disposed of following use. Doing so prevents 

   infections and inflammations.

• Never remove hair straight after a bath or shower; wait approx. two hours to ensure the skin is not 

   irritated.

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Beurer HL 40?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"