Beurer HL 35 - Инструкция по эксплуатации - Страница 13

13

• If the charger indicator lamps flash slowly this means that the battery is charging. Once 

   the display is permanently illuminated, the device is fully charged. 

   Then you can begin using the device on battery power. Mains operation is not possible.

• If the charger indicator lamps flash rapidly during battery operation, the battery is empty. 

   Charge the device by placing it on the station or connecting it to the mains adapter.

• One charge is sufficient for approx. 60 minutes of wireless operation.

 Note

•  In order to achieve a long battery service life, fully charge the battery at least once per year.

• The lady shaver can be used in the shower or bath and it can be cleaned under running 

   water.

• When used on dry skin, the skin must be completely dry and free from grease. 

• When used on wet skin, it is important that the skin is sufficiently damp so that the device 

   can  glide optimally over the skin. Shower gel or soap facilitates the shaving process. 

• Do not use creams/lotions containing alcohol before or after using the shaver. 

• In order to avoid irritation, do not press the shaver head too firmly onto the skin.

• Thoroughly clean the shaver head before shaving. This reduces the risk of infection as far as 

is possible. 

• Press the on/off button to switch on the device. 
• The LED light ensures optimal lighting conditions so that you can see and remove the finest hairs. 
• Hold the skin taught with your free hand, to raise the hair. 
• Use the device slowly, steadily and without pressure with the illuminated side against the di-

rection of hair growth. As hair doesn‘t always grow in one direction, it can be useful to move 
the device in various directions over the skin to achieve an optimal result.

Using the exfoliation attachment

The exfoliation attachment gently removes dry, dead skin cells and prevents ingrowing hairs.

• Remove the shaver attachment by gently pulling it out.

• Insert the exfoliation attachment.

• Switch on the device and move it slowly and gently over the skin.

Using the spacer combs

Using the spacer combs, you can cut your hair to two different lengths: 

• Small spacer comb 4mm 

• Large spacer comb 8mm

• Position the comb you wish to use on the shaver head such that the teeth of the comb face 

  outward on the illuminated side.

• Switch the device on and always move the device against the direction of hair growth.

• Ensure that the comb surface always remains in contact with the skin.

5. Care and storage

 WARNING

 • Disconnect the device before cleaning it.

 • Only clean the appliance in the manner specified. Fluid must never be allowed to enter 

   into the device or accessories.