AL-KO SOLO 621 - Инструкция по эксплуатации - Страница 19

GB-2

Introduction to the Operating Instructions

These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in 
accordance with the regulations. The Operating Instructions contain important information on how to use the machine 
safely, correctly and economically. Observing this information will help increase the reliability and working life of the 
machine. The Operating Instructions must always be at hand when the machine is being used. 
They must be read and observed by every person dealing with the machine, whether operating, servicing or trans-
porting it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country 
of use and on site, the generally recognised rules on working safely and correctly must be observed as well as the 
accident prevention rules of the relevant professional associations.

1. Technical Data

The devices are manufactured in accordance with the provisions of DIN EN 60745-2-13 and fully comply with the 
provisions of the Product Safety Act.

Model  

                                              621     

Rated Voltage                                                             230 V~ 

Nominal Frequency    

                                              50 Hz 

Fuse (time lag)       

                                              16 A

Rated Output                                                              2500 W

Rated Current                                                                   11,3 A 

Guide Bar                                                                   400 mm

Cutting length 

                                              380 mm

Chain 

                                              91PX 057X

Drive link width 

                                                  1,3 mm 

Chain pitch  

                                              3/8’’

Speed                       

                                              ca. 12,5 m/sec 

Weight                                                                      4,

 kg 

Oil                           

                                              300 ml 

All models with automatic chain lubrication and mechanical chain brake and rundown brake. 

We reserve the right to make changes to the technical specifi cations.

Class of Protection:             II/ DIN EN 60745-1
Interference Suppression:    EN 55014

Noise emission information in accordance with the German Equipment and Product Safety Act (GPSG) and the EC 
Machine Directive:

Noise emission values EN 60745-2-13:2011-07

Sound Pressure Level  L

pA

90 dB (A)  [K=3,0 dB (A)]

Vibration values in accordance with EN 60745-2-13:2011-07

Weighted acceleration handle    

5,0 m/s

2 

[K=1,1 m/s

2

 ]

Attention: This chain saw is only intended for cutting wood !!!

E N G L I S H

Chainsaw

2. General safety instructions 

Noise emission information in accordance with the German Equipment and Product Safety Act (GPSG) and the EC 
Machine Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will 
require noise protection (e.g. wearing of ear protectors).

Attention: Noise protection !  Please observe the local regulations when operating your device.