Электробритвы Vitek VT-8266 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

5
ENGLISH
•
It is recommended to clean the shaving
heads every two months (pic. 7, 8).
•
Switch the shaver off by setting the
switch (4) to the «0» position.
•
Press the release button (2) and remove
the shaving block (1).
•
Press and turn the frame clamp counter-
clockwise and remove the frame.
•
Remove every stationary net together
with the rotating blade.
Note: Be careful when removing the
stationary nets; install the rotating
blades to the same stationary nets after
cleaning, otherwise fitting of rotat-
ing blades to the nets will take some
time and this may affect the quality
of shaving.
•
Clean the rotating blades and the sta-
tionary nets with the brush.
•
Install the stationary nets into the shav-
ing block; ensure that nets are fixed; to
fix the net turn it clockwise or counter-
clockwise.
•
Insert the rotating blades into the sta-
tionary nets.
•
Install the locking frame, press the frame
clamp and turn it clockwise.
Note: Match the ledges on the shaving
block with the openings in the locking
frame; otherwise you’ll not be able to
install the locking frame.
•
Install the shaving block on the shaver.
Attention!
You can wash the shaving block under
a warm water jet (pic. 9), if the shaving
block (1) is detached from the shaver
body (3).
Dry the shaving block (1) thoroughly before
installing it, provide that water doesn’t get
into the shaver body.
Trimmer
•
Clean the trimmer after each use.
•
Switch the shaver off.
•
Move the trimmer lock (7) upwards.
•
Clean the trimmer with the brush (10)
supplied with the unit.
•
Every six months lubricate the trimmer
with a drop of oil for sewing machines or
hair clippers.
Replacement of shaving heads
(pic. 7, 8)
For the best shaving results replace the
shaving heads every 2 years.
Replacement of shaving heads is per-
formed as described in chapter
«CLEANING AND CARE».
•
Switch the shaver off.
•
Press the release button (2) and remove
the shaving block (1).
•
Turn the frame clamp counterclockwise
and remove the frame.
•
Replace the shaving heads, install the
locking frame, press the frame clamp
and turn it clockwise.
•
Install the shaving block (1) on the
shaver.
Note: After replacement of the shaving
heads the fitting of rotating blades to the
nets will take some time.
ENVIRONMENTAL PROTECTION
The shaver is provided with a dispos-
able battery. Before you throw away
the inoperative shaver discharge the
battery completely, remove it and dis-
pose of it according to the hazard-
ous waste disposal regulations of your
country.
Do not throw away the shaver until you
remove the built-in battery.
DELIVERY SET
Men shaver – 1 pc.
Power cord – 1 pc.
Protective cap – 1 pc.
Cleaning brush – 1 pc.
IM VT-8266.indd 5
IM VT-8266.indd 5
1/22/20 11:15 AM
1/22/20 11:15 AM
Содержание
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)