Sinbo SS 4049 - Инструкция по эксплуатации - Страница 4

- 3 -

For additional protection, the installation of a residual current device with a rated residual
operating current not exceeding 30 mA is advisable in the electrical circuit supplying the
bathroom. Ask your installer for advice.

CAUTION: If the electric cable is damaged, it must be replaced by the manufacturer, his
after-sales service or people with similar qualification, in order to avoid any danger. In
order to minimize the risks of electric shock, In the event of breakdown, not to open the
case but to call upon a qualified technician for repairs.

This apparatus satisfied EC directives; it was controlled according to all the European
current directives, like: electromagnetic compatibility (EMC) and low tension (LVD). This
apparatus was designed and manufactured in respect of the last safety regulations and
technical specifications.

ENVIRONMENTAL PROTECTION
(Destruction of Ni-MH or Ni-Cd batteries)
The appliance must be disconnected from the main power, when the battery is removed.

To remove the battery:
• Remove the two screws located in the upper part,
• Remove the screws at the back under the plate.
• Disassemble the two parts of the unit and remove the battery.
- THE BATTERY MUST BE REMOVED BEFORE THE UNIT IS GIVEN TO REBUS.
- THE BATTERY MUST BE ELIMINATED IN A SAFE WAY.