Электробритвы Philips SC2007/00 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Handling the device
1
Before use, charge the device, clean the attachments and the light exit
window and select the right light intensity for your skin tone.
90°
2
Place the device at a 90° angle on the skin so that the attachment and
the safety ring are in contact with your skin.
The safety ring prevents unintentional flashing
without skin contact.
3
Press the device
firmly onto your skin to ensure
proper skin contact.
The
'ready to flash' light on the back of the device lights up green to
indicate that you can proceed with the treatment.
4
Press the flash button to release a flash.
You should feel a warm
sensation because of the flash.
Note: The light produced by the device is harmless to your eyes. It is not
necessary to wear goggles during use. Use the device in a well-lit
room
so that the light is less glaring to your eyes.
5
Place it on the next area to be treated. After each flash, it takes up to 3.5
seconds until the device is ready to flash again. You can release a flash
when the 'ready to flash' light lights up again.
6
To make sure that you have treated all areas, release the flashes close to
each other. However, make sure you flash the same area only once.
Flashing the same area twice doesn't improve the effectiveness of the
treatment, but increases the risk of skin reactions
13
English
