Braun 4875 - Инструкция по эксплуатации - Страница 4

4

English

Our products are designed to meet the 
highest standards of quality, functionality and 
design. We hope you enjoy your new Braun 
Shaver. 

Warning

Your shaver is provided with a special cord set 
with integrated Safety Extra Low Voltage 
power supply. Do not exchange or manipulate 
any part of it. Otherwise there is risk of electric 
shock.

Description

1 Shaver foil
2 Cutter block
3 Release button
4 On/off switch («start/stop»)
5 Long hair trimmer
6 Charging light (green) 
7 Low-charge light (red) 
8 Special cord set

Charging

The best environmental temperature for 
charging is between 15 °C and 35 °C.
• Connect the shaver to an electrical outlet 

with the motor switched off.

• When charging for the first time, leave the 

shaver to charge continuously for 4 hours.

• The green charging light (6) shows that 

the shaver is being charged. When the 
batteries are fully charged, the charging 
light intermittently blinks on and off. This 
indicates that the battery maintains its full 
capacity.

• Once the shaver is completely charged, 

discharge the shaver through normal use. 
Then recharge to full capacity. Subsequent 
charges will take about 1 hour.

• A full charge provides up to 40 minutes of 

cordless shaving time depending on your 
beard growth. However, the maximum 
battery capacity will only be reached after 
several charging/discharging cycles.

• The red low-charge light glows when the 

shaver capacity has dropped below 20% 

provided the shaver is switched on. The 
remaining capacity will then be sufficient 
for 2 to 3 shaves.

• If the rechargeable batteries are discharg-

ed, you may also shave by connecting the 
shaver to an electrical outlet via the special 
cord set.

Shaving

Press the on/off switch (4) to turn the shaver 
on.

Trimmer:

When the long hair trimmer (5) is activated, it 
allows the controlled trimming of moustache 
or sideburns.

Cleaning

This appliance is suitable for cleaning 
under an open water tap. 
Warning: Detach the hand-held part 

from the power supply before cleaning it in 
water. 

Regular cleaning ensures better shaving 
performance. Rinsing the shaving head after 
each shave under running water is an easy 
and fast way to keep it clean:
• Switch the shaver on (cordless) and rinse 

the shaving head under hot running water. 
A natural based soap may also be used 
provided it contains no particles or abra-
sive substances. Rinse off all foam and let 
the shaver run for a few more seconds.

Tips for the perfect shave

• We recommend that you shave before 

washing, as the skin tends to be slightly 
swollen after washing.

• Hold the shaver at right angles (90°) to the 

skin. Stretch the skin and shave against 
the direction of beard growth.

• To maintain 100% shaving performance, 

replace the shaver foil and cutter block at 
least every 18 months or when worn.

FIX400_4875_AMEE  Seite 4  Montag, 10. April 2006  8:17 08