Philips HX9182 Sonicare FlexCare Platinum - Инструкция по эксплуатации - Страница 15

,

To deactivate Easy-start: Press and hold the power on/off button for 

2 seconds. You hear 1 beep to indicate that the Easy-start feature has 

been deactivated.

Note: Each of the first 14 brushings must be at least 1 minute in length to 

properly move through the Easy-start ramp-up cycle.
Note: Using the Easy-start feature beyond the initial ramp-up period is not 

recommended and reduces Sonicare’s effectiveness in removing plaque.

Sanitising (specific types only)

 - With the UV sanitiser you can clean your brush head after ever y use  

(Fig. 12).

Unplug the sanitiser, discontinue use and call Consumer Care if

: 

 - The UV light bulb remains on when the door is open.

 - The window is broken or missing from the sanitiser.

 - The sanitiser gives off smoke or a burning smell while it is operating.

Note: UV light can be harmful to the human eye and skin. Keep the sanitiser 

out of the reach of children at all times.

 1 

 After brushing, rinse the brush head for 15 seconds and shake off 

excess water.

Do not place the travel cap on the brush head during sanitisation.

 2 

 Let the brush head to dry in open air for 2 minutes.

 3 

 Place your finger in the door recess on top of the sanitiser and pull 

open the door (Fig. 13).

 4 

 Place the brush head on one of the 2 pegs in the sanitiser with the 

bristles facing the light bulb.  (Fig. 14)

Note: Only clean Sonicare snap-on brush heads in the sanitiser.
Note: Do not clean Sonicare for Kids brush heads in the sanitiser.

 5 

 Put the plug of the sanitiser in the wall socket.

 6 

 Close the door and press the green power on/off button once to 

select the UV clean cycle.

ENGLISH

15