Am.Pm X-Joy - Инструкция по эксплуатации - Страница 2

2

English 

Installation  

instructions

•  Installation of item should be carried 

out only byqualified personnel, following 

the instructions of this guidance.

• 

Assembly is carried out by two persons.

• 

Please, check for presence of all details 

after unpacking. Glass panels must be 

transported vertically.

• 

Please, lean glass panels vertically 

against the wall during assembly 

of other parts.

• 

It is expressly prohibited to wap upon 

corners of glass panels.

It is required to remove protective film 

after carrying out of assembly oprations.

Product 

maintenance

• 

For correct operation of the system it is 

required to install purification filters at 

feed pipelines with degree of purifica

-

tion of 100–300 micron.

• 

For the avoidance of damage of the 

surface of the product it is not allowed 

to use water of temperature more than 

60°С.

• 

Use only mild detergents and soap for 

cleaning of the item.

• 

Do not use corrosive washing agents or 

abrasive pastes for cleaning of the item.

•  Accute contamination on the surface 

is reccomended to treat with diluted 

vinigar and wash off with water.

• 

Shallow scratches (for acrylic parts 

of the item) can be removed with fine 

grid sandpaper (grade 2000).

Instruction is designed for expert.

Assembly and installatin must be carried 

out only by qualified personnel following 

the instructions of this guideline.

AT TENTION!  

Assembly is carried out by two persons.

Producer has a right to introduce change 

of component parts that has no effect on 

appearance and functionality of product. 

All parameters indicated in this instruction 

have formal meaning. Producer reserves 

the right for technical changes.

After assembly sealant must be given 

some time to harden. It is forbidden to 

use item wihin 24 hours after completion 

of installation.